HP StorageWorks 3000/5000 Enterprise Virtual Array updating product software guide (VCS 3.110) (5697-8108, March 2009)

Figure 8 Sample SAN Visibility report
Back up all storage system data
Estimated time to complete: Varies
When to perform: As close as possible to the upgrade
Before beginning the upgrade, it is recommended that you perform a full verified backup of all storage
system data. Although not required, it is always good practice to back up your data before performing
major operations such as software upgrades. The backup should be scheduled as close to the upgrade
process as possible.
For more information about establishing and implementing good backup procedures for the EVA,
contact your HP sales representative.
Upgrading HP Command View EVA (Optional)
Estimated time to complete: 15–20 minutes
When to perform: Any time prior to the upgrade
HP Command View EVA 5.x, 6.x, or later is required with VCS 3.110. Check the current version and
upgrade the software if necessary. If you want to upgrade multiple disk drives, you must upgrade to
HP Command View EVA 6.0.2. You can upgrade to version 6.0.2 from version 6.0.
For more information on HP Command View EVA, including the HP StorageWorks Command View
EVA installation guide and the release notes, download documentation from the web site listed in
“Required documentation” on page 13.
Upgrading using the typical installation
This procedure is for the typical HP Command View EVA installation. To use the custom installation
procedure, which provides control over which components are installed, see HP StorageWorks
Command View EVA installation guide for instructions.
To install the complete software suite:
HP StorageWorks 3000/5000 Enterprise Virtual Array updating product software guide (VCS
3.110) 29