HP StorageWorks Sun Solaris Kit V3.0B for Enterprise Virtual Array Installation and Configuration Guide (AA-RUH4B-TE, October 2003)

Installing the Sun Solaris Kit
22 Sun Solaris Kit V3.0B for Enterprise Virtual Array Installation and Configuration Guide
3. Select the folder in which you want to save the file when presented with the
Save As dialog box.
Note: The folder you select must be large enough to store the OS kit selected. File
sizes range from 17 to 70 MB depending on the operating system selected.
The Platform Kit software is available as a .tar or .zip file. After you download it
to your computer, your options are:
■ Create a CD-ROM using the .tar file.
You may want to uncompress the .tar file prior to copying it to the CD-ROM.
■ Copy the .zip file to the server that runs the Platform Kit software.
Uncompress the file and run the install program on the server.
Installing the Host Kit from the CD-ROM
Follow this procedure to install the Kit software from the CD-ROM:
1. Insert the Sun Solaris Kit V3.0B for Enterprise Virtual Array CD-ROM into
your CD-ROM drive.
2. Mount the CD-ROM.
3. Change to the CD-ROM directory.
/cdrom/hsv_v3b_sun
4. Run the installation program: install_stgwks.
# ./install_stgwks
Choose the automatic or manual option.
— Automatic—The installation program detects the FCAs in your server
and installs the appropriate drivers along with SSSU.
— Manual—You manually select the correct drivers for your FCAs and, if
you want to install SSSU, you should also select the CPQhsv package.
Note: If a previous version of the CPQhsv package is on the server, you need to
remove it before installing the newer version. With the automatic installation, you are
asked if you want to remove it. If you do, you need to remove it manually.