HP StorageWorks EVA iSCSI Connectivity Option 5.0 release notes (5697-6714, August 2007)

LUN 0 is automatically presented by Command View whenever a Virtual Disk is presented to an iSCSI

host iqn.

Workaround

After presenting any LUN to the Solaris server iqn using Command View, the user must remove LUN 0

from the Solaris iqn entry for eac h iSCSI presented target on the mpx100:

1. UseTelnettoc

onnect to the mpx100 management port, or connect to the mpx100 serial port using

the HP-supplied connector.

NOTE:

The mpx100 management port’s default IP address is 10.0.0.1/255.0.0.0. The mpx100

serial port’s default setting is 115200/8/n/1.

2. To log in, enter:

•Username:guest

•Password:password

3. To enable administrator privileges, enter:

•

admin start

•

config

4. Enter the lunmask rm command and follow the prompts to remove the Solaris iSCSI initiator from

each iSCSI presented target:

For example:

> telnet 10.6.7.65

password: password

>admin start

password: config

mpx100 (admin) #> lunmask rm

Index (WWNN,WWPN/iSCSI Name)

— ——— —————————————

0 50:00:1f:e1:50:00:2f:70,50:00:1f:e1:50:00:2f:7e

Please select a Target from the list above (’q’ to quit): 0

LUN Vendor

— ——— —

0HP

1HP

2HP

3HP

4HP

Please select a LUN from the list above (’q’ to quit): 0

EVA iSCSI Connectivity Option 5.0