Mac OS X Fibre Channel connectivity to the HP StorageWorks Enterprise Virtual Array storage system configuration guide (5697-0025, August 2009)

Channel device
Select a channel (adapter port) from the Device Listing to view information about the ATTO Fibre
Channel card (PCI Info tab) or to configure the NVRAM. Figure 5 shows an example of a channel
NVRAM display.
Figure 5 Channel—NVRAM tab
Configuring the NVRAM
This section provides guidelines for configuring the NVRAM. After you have NVRAM settings, click
Commit to save the changes. You must reboot the system for the changes to take effect.
Use care when changing the NVRAM settings. Make changes only if you are sure of the results.
CAUTION:
ATTO host adapters are factory set for proper operation. Entering invalid or incorrect settings with
the ATTO Configuration Tool can result in unexpected behavior, such as hardware failure.
Mac OS X Fibre Channel connectivity to the HP StorageWorks Enterprise Virtual Array storage system
configuration guide 23