Mac OS X Fibre Channel connectivity to the HP StorageWorks Enterprise Virtual Array storage system configuration guide (5697-0025, August 2009)

Setting the load balancing policy on the EVA controller
To set the load balancing policy at the EVA controller level:
1. Right-click a target port on the Paths tab.
The target port option menu appears (Figure 7).
Figure 7 Target port option menu
2. Select Load Balancing.
A selection window opens (Figure 8).
Figure 8 Setting the load balancing policy for an EVA controller
3. Select a load balancing policy from the list, and then click Finish.
The new policy takes effect immediately.
NOTE:
All LUNs for the selected target port use the new policy.
ATTO Configuration Tool28