HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array hardware configuration guide Part number: 5697-7338 Fifth edition: February 2008
Legal and notice information © Copyright 2005-2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Contents About this guide . . . . . . . . . . . . . . . . . . . . . . . . . . Intended audience . . . . . . . . Related documentation . . . . . . Document conventions and symbols Rack stability . . . . . . . . . . HP technical support . . . . . . . Customer self repair . . . . . . . Product warranties . . . . . . . . Subscription service . . . . . . . HP websites . . . . . . . . . . . Documentation feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power configurations . . . . Specifications . . . . . . . EVA cabinet footprint . . Weights and dimensions Center of gravity . . . . Tip stability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figures 1 FC drive enclosure—front and rear views . . . . . . . . . . . . . . . . . . . . . . 14 2 30-10022-01 FC loop switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3 30-10010-02 FC loop switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4 HSV210/200 controller—front view . . . . . . . . . . . . . . . . . . . . . . . . 16 5 HSV210-A/B controller—rear view . . . . . . . . . . . . . . . . . . . . . . . . 17 6 HSV200-A/B controller—rear view . . . . . . . . . . . . .
34 EVA4x00 2C4D cable diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 50 35 HP StorageWorks 42U low-voltage cabinet . . . . . . . . . . . . . . . . . . . . . 60 36 HP StorageWorks 36U low-voltage cabinet . . . . . . . . . . . . . . . . . . . . . 60 37 EVA cabinet footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tables 1 Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3 Maximum storage capacities for the 2C2D configuration . . . . . . . . . . . . . . . 23 4 Maximum storage capacities for the 2C6D configuration . . . . . . . . . . . . . . . 27 5 Maximum storage capacities for the 2C12D configuration . . . . . . . . . . . . . . 29 6 Maximum storage capacities for the 2C4D configuration . . . . . . . . . . . . . . .
About this guide This hardware configuration guide provides information to help you: • Learn about the Enterprise Virtual Array hardware components. • Understand the supported storage rack configurations. • Understand the supported copper cable configurations.
WARNING! Indicates that failure to follow directions could result in bodily harm or death. CAUTION: Indicates that failure to follow directions could result in damage to equipment or data. IMPORTANT: Provides clarifying information or specific instructions. NOTE: Provides additional information. TIP: Provides helpful hints and shortcuts. Rack stability Rack stability protects personnel and equipment.
Customer self repair HP customer self repair (CSR) programs allow you to repair your StorageWorks product. If a CSR part needs replacing, HP ships the part directly to you so that you can install it at your convenience. Some parts do not qualify for CSR. Your HP-authorized service provider will determine whether a repair can be accomplished by CSR. For more information about CSR, contact your local service provider. For North America, see the CSR website: http://www.hp.
About this guide
1 EVA 4x00/6x00/8x00 hardware This chapter discusses the hardware components in the Enterprise Virtual Array (EVA). The following topics are discussed: • • • • • Storage rack Fibre Channel drive enclosures Fibre Channel loop switches EVA8x00 HSV210-A/B controllers EVA6x00 and EVA4x00 HSV200-A/B controllers Storage rack Racks are available for the EVA storage system in 36U and 42U configurations. The storage rack can hold a maximum of 12 Fibre Channel (FC) drive enclosures and two controllers.
1 2 Front 10 10 Rear 3 4 6 5 8 7 9 0112a Figure 1 FC drive enclosure—front and rear views 1. Drive bay 1 2. Drive bay 14 3. EMU 4. I/O module B 5. Blower 1 6. Power supply 1 7. Blower 2 8. Power supply 2 9. I/O module A 10. Status indicators (EMU, enclosure power, enclosure fault) Fibre Channel loop switches The Enterprise Virtual Array uses FC loop switches to connect all of the drive enclosures to the controller pair via copper cables.
• • • • • • Twelve ports Half-width, 1U size System and port status indicators An Ethernet port Universal power supply that operates between 100 to 250 VAC (or 50 to 60 Hz) SFP transceivers Figure 2 shows the rear view of the 30-10022-01 Fibre Channel loop switch. 1 2 100-240V~, 50/60 H Z 3 1 2 4 3 5 4 6 POWER 10101 FAULT TEMP 7 8 9 10 11 12 Figure 2 30-10022-01 FC loop switch 1. Ethernet activity 2. Ethernet link 3. Port status 4.
EVA8x00 HSV210-A/B controllers Two high-performance HSV210 controllers are included in each EVA8x00 rack. The EVA8000 controller is identified as HSV210-A and the EVA8100 controller is identified as HSV210-B.
1 2 5 10 6 3 7 4 6 5 8 9 Figure 5 HSV210-A/B controller—rear view 1. Dual controller interconnect 2. CAB (cabinet address bus) 3. Unit ID 4. Power ON switch 5. FC device ports 6. FC cache mirror ports 7. FC host ports 8. Power supply 0 9. Power supply 1 10. Service connectors (not for customer use) EVA6x00 and EVA4x00 HSV200-A/B controllers Two high-performance HSV200 controllers are included in each EVA6x00 and EVA4x00 storage system.
1 2 5 6 10 7 3 4 6 5 8 9 Figure 6 HSV200-A/B controller—rear view 1. Dual controller interconnect 2. CAB (cabinet address bus) 3. Unit ID 4. Power ON switch 5. FC device ports 6. FC cache mirror ports 7. FC host ports 8. Power supply 0 9. Power supply 1 10.
2 EVA8x00 configurations This chapter discusses the standard EVA8x00 configurations. Each section describes the placement of HSV controllers, drive enclosures, enclosure address bus shelf ID expansion cables, and copper Fibre Channel cables. NOTE: The configurations described in this guide are the preferred configurations. Other configurations may be used, but they should conform to the following: • Disk enclosures should be balanced across the two back-end loop pairs.
2 1 3 7 4 6 3 5 0178c Figure 8 EVA8x00 2C2D Storage-Centric cable diagram 1. 2. 3. 4. 5. 6. 7.
1 2 3 2 4 Mai n 1 2 3 Mai n 1 2 3 4 4 16354 Figure 9 2C2D Multi-Product configuration 1. 2. 3. 4. 3U blank Drive enclosure HSV210-A/B controller pair Power distribution units The 2C2D Multi-Product configuration cable routing diagram is located in Figure 10.
1 2 6 3 7 4 6 5 8 16357 Figure 10 EVA8x00 2C2D Multi-Product cable diagram 1. 2. 3. 4. 5. 6. 7. 8.
Table 3 Maximum storage capacities for the 2C2D configuration Disk size Maximum capacity 72 GB 2.0 TB 146 GB 4.0 TB 250 GB 7.0 TB 300 GB 8.4 TB 500 GB 14.0 TB 2C6D configurations There are two 2C6D configurations: the Storage-Centric (Figure 11) and the Multi-Product (Figure 13). Each configuration provides a maximum storage capacity of 25.2 TB and contains a maximum of 84 disks.
2 1 3 4 8 5 7 4 3 6 0177b Figure 12 EVA8x00 2C6D Storage-Centric configuration cable diagram 1. 2. 3. 4. 5. 6. 7. 8.
1 2 3 4 3 2 5 16355 Figure 13 2C6D Multi-Product configuration 1. 2. 3. 4. 5. 3U blank Drive enclosures FC switches HSV210-A/B controller pair Power distribution units The 2C6D Multi-Product configuration cable routing diagram is located in Figure 14.
1 6 2 7 8 3 7 4 6 5 9 16356 Figure 14 EVA8x00 2C6D Multi-Product configuration cable diagram 1. 2. 3. 4. 5. 6. 7. 8. 9.
Table 4 Maximum storage capacities for the 2C6D configuration Disk size Maximum capacity 72 GB 6.0 TB 146 GB 12.0 TB 250 GB 21.0 TB 300 GB 25.2 TB 500 GB 42.0 TB 2C12D configuration The 2C12D configuration provides a maximum storage capacity of 50.4 TB. This configuration can contain a maximum of 168 disks. This configuration is available in a 42U rack and has two HSV210-A/B controllers, twelve drive enclosures, and four loop switches. 1 1 2 3 1 1 16360 Figure 15 2C12D configuration 1.
2 3 1 4 8 5 7 4 3 6 0165b Figure 16 EVA8x00 2C12D cable diagram 1. 2. 3. 4. 5. 6. 7. 8.
Table 5 Maximum storage capacities for the 2C12D configuration Disk size Maximum capacity 72 GB 12.0 TB 146 GB 24.0 TB 250 GB 42.0 TB 300 GB 50.4 TB 500 GB 84.
EVA8x00 configurations
3 EVA6x00 configurations This chapter discusses the standard EVA6x00 configurations. Each section describes the placement of HSV controllers, drive enclosures, enclosure address bus shelf ID expansion cables, and copper Fibre Channel cables. NOTE: The configurations described in this guide are the preferred configurations. Other configurations may be used, but ensure that enclosure ID 7 is not used for any disk enclosure. 2C4D configuration The 2C4D configuration provides a maximum storage capacity of 16.
8 7 1 6 2 3 5 4 0170b Figure 18 EVA6x00 2C4D cable diagram 1. 2. 3. 4. 5. 6. 7. 8.
Table 6 Maximum storage capacities for the 2C4D configuration Disk size Maximum capacity 72 GB 4.0 TB 146 GB 8.1 TB 250 GB 14.0 TB 300 GB 16.8 TB 500 GB 28.0 TB 2C5D configuration The 2C5D configuration provides a maximum storage capacity of 21.0 TB. This configuration can contain a maximum of 70 disks. This configuration is available in a 42U, 41U, 36U, 33U, 25U, or 22U rack and has two HSV200-A/B controllers, five drive enclosures, and two loop switches. Figure 19 2C5D configuration 1. 2. 3.
8 7 1 6 2 3 5 4 1 0169b Figure 20 EVA6x00 2C5D cable diagram 1. 2. 3. 4. 5. 6. 7. 8.
Table 7 Maximum storage capacities for the 2C5D configuration Disk size Maximum capacity 72 GB 5.0 TB 146 GB 10.0 TB 250 GB 17.5 TB 300 GB 21.0 TB 500 GB 35.0 TB 2C6D configuration The 2C6D configuration provides a maximum storage capacity of 25.2 TB. This configuration can contain a maximum of 84 disks. This configuration is available in a 42U, 41U, 36U, 33U, or 25U rack, and has two HSV200-A/B controllers, six drive enclosures, and four loop switches. Figure 21 2C6D configuration 1. 2. 3. 4.
8 7 1 6 2 3 5 4 1 0168b Figure 22 EVA6x00 2C6D cable diagram 1. 2. 3. 4. 5. 6. 7. 8.
Table 8 Maximum storage capacities for the 2C6D configuration Disk size Maximum capacity 72 GB 6.0 TB 146 GB 1.0 TB 250 GB 21.0 TB 300 GB 25.2 TB 500 GB 42.0 TB 2C7D configuration The 2C7D configuration provides a maximum storage capacity of 29.4 TB. This configuration can contain a maximum of 98 disks. This configuration is available in a 42U, 41U, 36U, or 33U rack and has two HSV200-A/B controllers, seven drive enclosures, and two loop switches. Figure 23 2C7D configuration 1. 2. 3. 4.
8 7 1 2 6 3 5 4 1 0167b Figure 24 EVA6x00 2C7D cable diagram 1. 2. 3. 4. 5. 6. 7. 8.
Table 9 Maximum storage capacities for the 2C7D configuration Disk size Maximum capacity 72 GB 7.0 TB 146 GB 14.0 TB 250 GB 24.5 TB 300 GB 29.4 TB 500 GB 49.0 TB 2C8D configuration The 2C8D configuration provides a maximum storage capacity of 33.6 TB. This configuration can contain a maximum of 112 disks. This configuration is available in a 42U, 41U, 36U, or 33U rack and has two HSV200-A/B controllers, eight drive enclosures, and two loop switches. Figure 25 2C8D configuration 1. 2. 3. 4.
8 1 7 2 6 3 5 4 1 0166b Figure 26 EVA6x00 2C8D cable diagram 1. 2. 3. 4. 5. 6. 7. 8.
Table 10 Maximum storage capacities for the 2C8D configuration Disk size Maximum capacity 72 GB 8.0 TB 146 GB 16.0 TB 250 GB 28.0 TB 300 GB 33.6 TB 500 GB 56.
EVA6x00 configurations
4 EVA4x00 configurations This chapter briefly discusses the standard EVA4x00 configurations. Each section describes the placement of HSV controllers, drive enclosures, enclosure address bus shelf ID expansion cables, and copper Fibre Channel cables. NOTE: The configurations described in this guide are the preferred configurations. Other configurations may be used, but ensure that enclosure ID 7 is not used for any disk enclosure.
Figure 28 EVA4x00 2C1D cable diagram 1. 2. 3. 4. 5. 6. 7. HSV200-A/B controller pair Drive enclosure Bottom terminator Dual controller interconnect cable Y cable ID port 6 Top terminator 2C1D features The following features are included with the 2C1D configuration: • • • • • One storage rack One 14–drive bay FC drive enclosures One 2–port enclosure address bus shelf ID expansion cable Six AC strips Two 1U PDUs (not shown in figure) NOTE: Disks must be ordered separately.
2C2D configuration The 2C2D configuration provides a maximum storage capacity of 8.4 TB. This configuration can contain a maximum of 28 disks. This configuration is available in a 42U, 41U, 36U, 33U, 25U, or 22U rack and has two HSV200-A/B controllers and two drive enclosures. Figure 29 2C2D configuration 1. 3U blank 2. HSV200-A/B controller pair 3. Drive enclosures The 2C2D cable routing diagram is located in Figure 30.
7 6 5 1 4 2 3 2 0173b Figure 30 EVA4x00 2C2D cable diagram 1. 2. 3. 4. 5. 6. 7. HSV200-A/B controller pair Drive enclosure Bottom terminator Dual controller interconnect cable Y cable ID port 6 Top terminator 2C2D features The following features are included with the 2C2D configuration: • • • • • One storage rack Two 14–drive bay FC drive enclosures One 2–port enclosure address bus shelf ID expansion cable Six AC strips Two 1U PDUs (not shown in figure) NOTE: Disks must be ordered separately.
2C3D configuration The 2C3D configuration provides a maximum storage capacity of 12.6 TB. This configuration can contain a maximum of 42 disks. This configuration is available in a 42U, 41I, 36U, 33U, 25U, or 22U rack and has two HSV200-A/B controllers and three drive enclosures. Figure 31 2C3D configuration 1. 3U blank 2. HSV200-A/B controller pair 3.
7 6 5 1 2 4 3 2 0172b Figure 32 EVA4x00 2C3D cable diagram 1. 2. 3. 4. 5. 6. 7. HSV200-A/B controller pair Drive enclosure Bottom terminator Dual controller interconnect cable Y cable ID port 6 Top terminator 2C3D features The following features are included with the 2C3D configuration: • • • • • One storage rack Three 14–drive bay FC drive enclosures One 2–port enclosure address bus shelf ID expansion cable Six AC strips Two 1U PDUs (not shown in figure) NOTE: Disks must be ordered separately.
2C4D configuration The 2C4D configuration provides a maximum storage capacity of 16.8 TB. This configuration can contain a maximum of 56 disks. This configuration is available in a 42U, 41U, 36U, 33U, 25U, or 22U rack and has two HSV200-A/B controllers and four drive enclosures. Figure 33 2C4D configuration 1. 3U blank 2. HSV200-A/B controller pair 3. Drive enclosures The 2C4D cable routing diagram is located in Figure 34.
7 6 5 1 2 4 3 2 0171b Figure 34 EVA4x00 2C4D cable diagram 1. 2. 3. 4. 5. 6. 7. HSV200-A/B controller pair Drive enclosure Bottom terminator Dual controller interconnect cable Y cable ID port 6 Top terminator 2C4D features The following features are included with the 2C4D configuration: • • • • • One storage rack Four drive bay FC drive enclosures One 2–port enclosure address bus shelf ID expansion cable Six AC strips Two 1U PDUs (not shown in figure) NOTE: Disks must be ordered separately.
Table 14 Maximum storage capacities for the 2C4D configuration Disk size Maximum capacity 72 GB 4.0 TB 146 GB 8.0 TB 250 GB 14.0 TB 300 GB 16.8 TB 500 GB 28.
EVA4x00 configurations
A Specifications This appendix defines the physical, environmental, and power specifications of the EVA 4x00/6x00/8x00 storage systems. The following topics are included: • Physical specifications • Environmental specifications • Power specifications Physical specifications This section describes the physical specifications of the drive enclosure and elements. Table 15 defines the dimensions and weights of the storage system components.
Table 16 Environmental specifications Operating Temperature 50° to 95° F (10° to 35° C) - Reduce rating by 1° F for each 1000 ft altitude (1.8° C/1,000 m) Shipping Temperature -40° to 150° F (-40° to 66° C) Humidity 10% to 90% non-condensing Shipping Humidity 5% to 90% non-condensing Altitude Up to 8,000 ft (2,400 m) Air Quality Not to exceed 500,000 particles per cubic foot of air at a size of 0.
Table 18 Power Data (North America/Europe/Japan) maximum configuration AC plug type (quantity 2) North America – 3 wire NEMA No. L6-30P, 30 amp (208 to 240V, 50–60Hz, 30A) Europe – 3 wire, 2 pole IEC 309, 30 amp, (220 to 240V, 50Hz, 32A) Number of phases Single Rated current 17A @ 200V-240V AC, 60Hz total, 4.
Table 21 EVA6x00 power specifications — 208 Volts 2C4D 2C5D 2C6D 2C7D 2C8D Total System Wattage 1837 2214 2590 2967 3344 Total System BTU/hour 6268 7553 8838 10124 11409 Input Current (A) - Typical per system 4.6 5.5 6.5 7.4 8.4 In Rush Current (A) 220 250 280 321 363 Input Current (A) - Maximum per system 7.8 9.4 11.0 12.6 14.
Table 23 EVA8x00 power specifications — 208 Volts 2C2D 2C6D 2C8D 2C10D 2C12D Total System Wattage 1153 2660 3414 4167 4920 Total System BTU/hour 3936 9077 11648 14218 16789 Input Current (A) - Typical per system 2.9 6.7 8.5 10.4 12.3 In Rush Current (A) 132 280 363 451 528 Input Current (A) - Maximum per system 4.9 11.3 14.5 17.7 20.
Specifications
B Low-voltage Japanese cabinets General description This specification describes HP's requirements for low voltage EVA storage cabinets. These low voltage cabinets are configured with two redundant sets of PDUs in order to provide system required power. Each PDU set is limited to 2550 W at a minimum voltage of 108. Each PDU is limited to one power strip to limit the number of EVA component attachment to eight components per power PDU. Power strip additions will likely overload the PDU systems.
42 U 41 U 40 U 39 U 38 U 37 U 36 U 35 U 34 U 33 U 32 U 31 U 30 U 29 U 28 U 27 U 26 U 25 U 24 U 23 U 22 U 21 U 20 U 19 U 18 U 17 U 16 U 15 U 14 U 13 U 12 U 11 U 10 U 09 U 08 U 07 U 06 U 05 U 04 U 03 U 02 U 01 U 0156a Figure 35 HP StorageWorks 42U low-voltage cabinet 36 U 35 U 34 U 33 U 32 U 31 U 30 U 29 U 28 U 27 U 26 U 25 U 24 U 23 U 22 U 21 U 20 U 19 U 18 U 17 U 16 U 15 U 14 U 13 U 12 U 11 U 10 U 09 U 08 U 07 U 06 U 05 U 04 U 03 U 02 U 01 U 0157a Figure 36 HP StorageWorks 36U low-voltage cabinet Specif
EVA cabinet footprint Figure 37 shows the dimensions of the EVA cabinet footprint. 23.73" 60.96" 37.46" 90° 0158a Figure 37 EVA cabinet footprint Weights and dimensions Table 25 shows the weights and dimensions for the 42U low-voltage cabinet. Table 26 shows the same information for the 36U low-voltage cabinet. Table 25 HP StorageWorks 42U low-voltage cabinet Weight lbs Height in Width in Depth in Assembly 254 78.85 23.73 40.22 Packaged Assy 367 84.63 35.50 46.
Table 27 Center of gravity measurements — 42U low-voltage cabinet Measurement Inches Depth from mounting face of vertical mounting rails 16.56 Height from inside base 37.09 Distance from cabinet center (viewing front of cabinet) 0.
Index Symbols O opal rack, 13 2C2D configuration describing features, 22, 46 36U rack, 13 42U rack, 13 P physical specifications enclosures, 53 power specifications drive enclosure, 54 prerequisites, 9 C controller defined, 16 conventions document, 9 text symbols, 10 customer self repair, 11 R rack stability warning, 10 D S document conventions, 9 prerequisites, 9 documentation providing feedback, 11 E enclosures, physical specifications, 53 environmental specifications drive enclosure, 53 F
