HP StorageWorks EVA4100 SAN Starter Media Kit Read Me First (5697-6721, July 2007)

READ ME FIRST

HP StorageWorks EVA4100 SAN Starter

Media Kit read me ﬁrst

Media kit CDs

The following C

Ds are included in the EVA4100 SAN Starter Media kit:

• Windows EZPilot Installation CD—Used to install EZPilot on a Windows management or

non-management server; includes HP StorageWorks Command View EVA which is installed on

the Windows ma

nagement server du ring the EZPilot installation

• Linux EZPilot Installation CD—Used to install the Emulex d river and utilities on a Linux

non-management server

System Requirements

NOTE:

A Windows management server is required for Emulex EZPilot and HP Command View EVA.

• Operating system

• Management server:

•WindowsServer2003SP2

•WindowsServer2003x64SP2

• Windows non-management server:

•WindowsServer2003SP2

•WindowsServer2003x64SP2

• Linux non-management server:

• Red Hat Enterprise Linux 4 (latest update)

• SUSE Linux Enterprise Server 9 (latest servi ce pack)

• SUSE Linux Enterprise Server 10 (latest service pack)

• Processor: 1.26 GHz (minimum)

• Memory: 2 GB (minimum)

*5697-6721*

Windows is a U.S. registered trademark of Microsoft Corporation. Printed in Puerto Rico.

Second e d ition: July 2007

The information in this document is subject to change without notice.

PAGE 1
READ ME FIRST HP StorageWorks EVA4100 SAN Starter Media Kit read me first Media kit CDs The following CDs are included in the EVA4100 SAN Starter Media kit: • Windows EZPilot Installation CD—Used to install EZPilot on a Windows management or non-management server; includes HP StorageWorks Command View EVA which is installed on the Windows management server during the EZPilot installation • Linux EZPilot Installation CD—Used to install the Emulex driver and utilities on a Linux non-management server System
PAGE 2
• Management server disk space: • 1.6 GB for EZPilot installation and SAN Setup (including HP Command View EVA installation) • 2 GB for HP Command View EVA log files • 10 MB for the managed array • Non-management server disk space: 1 GB Prerequisites for installing EZPilot • Record the switch IP address, gateway, and subnet mask. You will use this information during installation. • Ensure that the storage system is uninitialized (the state in which it was shipped).