Manualshelf

HP 30-1002201 Loop Switch CLI Reference Guide (5697-5675, May 2006)

ManualsBrandsHP ManualsComputer AccessoriesHP EVA8000 Loop Switch Option
21222324252627282930
30-10022-01 loop switch CLI reference guide 27
Displaying Sensor Information (show/sensors)
This command displays switch sensor information, including enclosure temperature, fan, and power
supply status.
To view switch sensor information:
From the Show menu (show), type sensors and press E
NTER.
Displaying SFP Serial ID Information (show/sid)
This command displays information (if available) about an inserted SFP transmitter for a specific port.
To view the SFP serial data for a specific port:
From the Show menu (show), type sid <port number> and press E
NTER.
Displaying Port Statistic Information (show/stat)
This command displays statistical information for each port.
To display port statistic information:
From the Show menu (show), type stat and press E
NTER.
The Port Statistic Data menu provides commands to display port statistic information.
Setting Indicator
Temperature sensor Nominal (green)–the switch temperature is within the normal operating range.
OverTemp (red)–the enclosure temperature has exceeded the recommended
operating range (above 45
o
C).
Fan 1 Nominal (green)–the fan unit is working properly.
Not Present (yellow)–the fan unit has been removed or cannot be detected.
Fault (red)–the fan unit has stopped operating.
Power supply 1 Nominal (green)–the power supply unit is working properly.
Not Present (yellow)–the power supply unit has been removed or cannot be
detected.
Fault (red)–the power supply unit has stopped operating.
Menu Command Description Additional Information
1. class2traffic Displays Class 2 traffic information. See page 28.
2. class3traffic Displays Class 3 traffic information. See page 28.
3. classftraffic Displays Class F traffic information. See page 28.
4. alltraffic Displays all traffic information. See page 28.
5. lowlevellink Displays low-level link information. See page 29.
6. highlevellink Displays high-level link information. See page 29.
7. framecnts Displays frame count information. See page 30.
8. clearstat Clears the current statistical information. See page 30.
9. .. Returns to the previous menu. See page 12.
10. ? Displays the current menu. See page 10.