Contents Chapter 1 Welcome ...................................................................................................................... 1 What’s in the Box Chapter 2 .................................................................................................. 2 The HP MediaSmart Server at a Glance (front) .......................................................... 3 The HP MediaSmart Server at a Glance (back) .........................................................
Chapter 5 Troubleshooting .......................................................................................................... 35 Troubleshooting Tips for the Server Health Indicator Codes ........................................................................ 36 ........................................................................................ 44 Troubleshooting Tips for Networking Issues .............................................................
Chapter 1 Welcome Welcome to the HP MediaSmart Server. • Enjoy your digital experiences anywhere over the Internet. • Share your life with friends and family with HP Photo Webshare. • Automatically backup and protect your digital memories.
What’s in the Box In the box you will find: • • • • • • • • • 2 Chapter 1 HP MediaSmart Server Power cord Ethernet cable Setup Poster Installation and Troubleshooting Guide (this document) Warranty & Support Guide Software Installation Disc PC Restore Disc Server Recovery Disc
The HP MediaSmart Server at a Glance (front) See the online User’s Guide for additional information on light colors or patterns not discussed here. Light bar There is one light bar for each internal hard drive in the HP MediaSmart Server. • Purple - The light bar is solid purple before the HP MediaSmart Server software is installed on the first computer. • Blue - The light bar is solid blue after the software is installed on one computer and the server restarts.
The HP MediaSmart Server at a Glance (back) USB ports Plug up to four USB 2.0 or later disk drives into the USB ports to expand your storage space. There is one USB port on the front and three on the back of the server. eSATA port Plug an eSATA (external SATA) hard drive into the eSATA port to expand your storage space. Ethernet port Connect the HP MediaSmart Server to your network using an Ethernet cable. Power switch Press to turn the HP MediaSmart Server on.
Chapter 2 Getting Started In this chapter you’ll connect the HP MediaSmart Server to your home network and install the software on your first home computer. To get started you need to 1 2 3 4 5 Connect the HP MediaSmart Server to your network and turn it on. Update the trusted programs list for any firewall or anti-virus software on your computer. Install the HP MediaSmart Server software on one computer. Follow the Setup Assistant in the Windows Home Server Console (see Chapter 3).
What You’ll Need to Set up the HP MediaSmart Server • One or more computers with Windows Vista, Windows XP, or Windows Media Center Edition (32 bit systems only). See the online User's Guide for a complete list of supported operating systems. • A broadband internet connection, such as DSL or cable. • An external Internet broadband router with 100 Mbps (or faster) Ethernet connection to the server. The router should be setup for DHCP, which automatically provides IP addresses as devices are plugged in.
Connect the HP MediaSmart Server to Your Network How to connect the HP MediaSmart Server to your network depends on your network configuration.
Turn on the HP MediaSmart Server 1 Plug in. Plug one end of the power cord into the server's power receptacle and the other end into an electrical outlet. 2 Connect. Connect one end of the Ethernet cable to the server and the other end to an available Ethernet port on your router or switch. 3 Power on. Press the Power button on the back of the server. The server takes approximately 60 seconds to start. The indicator lights blink and change color throughout the startup process.
Check Lights The lights on the front of the HP MediaSmart Server indicate the status of the server. After the HP MediaSmart Server startup completes and prior to the first software installation, the indicator lights show: • Hard drives—solid purple • Network—solid blue • Health—solid purple After you complete the software installation as described later in this chapter, all lights should be solid blue. For any difficulties, see “Troubleshooting” in this guide.
Update Your Firewall’s Trusted Program List The HP MediaSmart Server Software Installation Disc installs several programs that enable your computer to communicate with the HP MediaSmart Server over your network. Software firewalls installed on your computer can block this communication and prevent the computer from locating the HP MediaSmart Server on your network.
Install the Software on the First Computer Checking for Administrative Privileges You must have administrative privileges on your home computer to install the software. Complete the following instructions for Windows Vista or Windows XP to view or change user account settings. • In Windows Vista, click Start, Control Panel, and then User Accounts and Family Safety. • In Windows XP, click Start, click Control Panel, and then double-click User Accounts.
About the HP MediaSmart Server Software The HP MediaSmart Server software installs first. This software is used to • Provide a single point of access for all of the server’s features, • Share photos and videos quickly and securely over the Web using HP Photo Webshare, • Centralize your iTunes music library, and more! RECOMMENDATION: Click User’s Guide on this dialog box if you need additional assistance with the installation and setup. Click Next to display and accept the end user license agreement.
About the Windows Home Server Connector The Windows Home Server Connector: • Connects your computer to the server. • Automatically backs up your computer every night. • Monitors the health of the network and computers running Windows Vista. • Enables configuration of the server from your computer. Windows Home Server Setup runs only once—on the first computer where you install the Windows Home Server Connector software.
Initializing Windows Home Server The Windows Home Server initialization begins and can take several hours depending on your hardware. Please wait while Windows Home Server: • Configures your hardware • Recovers your data • Starts Windows Home Server Naming the HP MediaSmart Server Type a name for your server. Server names can be: • 15 characters maximum with no spaces • Letters (at least one), numbers and hyphens IMPORTANT: This is the only time you can name your server. It cannot be changed later.
Setting the Server Password On the Windows Home Server password page, you are asked to create a strong password. A strong password must be at least 7 characters long and must fulfill three of the following four requirements: • • • • Uppercase characters Lowercase characters Numbers Symbols (such as !, @, and #) NOTE: A password hint can be seen by anyone who clicks the Password hint button. IMPORTANT: The server password is not the same as a user password.
Customer Experience Improvement Program Join the Customer Experience Improvement Program (CEIP) and help make Windows Home Server even better. CEIP collects information about your hardware and home server usage without interrupting you. No information collected is used to identify or contact you. Choose if you want to participate in this program and click the next arrow.
Starting Windows Home Server Click Start to log on and open Windows Home Server. Logging on to Windows Home Server Type the password you created during the installation. For additional information, see “Setting the Server Password” on page 15. Checking for HP MediaSmart Server Updates The HP MediaSmart Server installation checks for any updates. Installing updates ensures that you experience the full functionality and optimal performance of the HP MediaSmart Server.
Introducing the HP MediaSmart Server Assistant The server installation is complete. When you click OK, the Assistant remains at the bottom of the page to guide you through setting up your HP MediaSmart Server. A green check mark appears for each completed step. Once all of the steps are complete, the Assistant link at the top of the page turns green.
Congratulations! You are Ready to Start Using Your Server Some HP MediaSmart Server features, such as backups and shared folders, are pre-configured and ready to go as soon as the first software installation is complete. Other features require some set up before you can use them. Backups After running the Software Installation Disc on your first home computer it is automatically added to the list of computers that are backed up by the HP MediaSmart Server each night.
Set up Additional Features Features such as HP Software Update, User Accounts, Remote Access, Photo Webshare, and Media Sharing require some setup. The Assistant guides you through setting up your server. Using the Assistant is optional but recommended to ensure that the most frequently used server features are set up correctly. 1 At the computer, double-click the Windows Home Server icon in the task tray and log on. The MediaSmart Server tab should be active.
Chapter 3 Using the Assistant The Assistant guides you through setting up your server. Using the Assistant is optional but recommended to ensure that the most frequently used server features are set up correctly. After running the Software Installation Disc, the installer displays the Windows Home Server Console with the MediaSmart Server tab selected. The Assistant displays at the bottom of the Windows Home Server Console.
Setting up the HP MediaSmart Server using the Assistant Opening the Assistant Complete the following steps if the Assistant is not already open. 1 At the computer, double-click the Windows Home Server icon in the system tray and log on. 2 3 Click the MediaSmart Server tab. Click Assistant in the upper right corner. The Assistant opens to the first incomplete task or closes at the bottom of the Windows Home Server.
Task 1 of 6: Setup HP Software Update Use the HP MediaSmart software update to keep your server and home computers current with the latest HP software, online help, and new features. HP MediaSmart software update does not update the Microsoft Windows Home Server operating system. For information about updating Windows Home Server, see Configuring Windows Update in the Windows Home Server Console Help. 1 On task1 of the Assistant, click Configure.
Type of User Acct Description Shared Folders Remote Access HP Photo Webshare Guest Everyone uses the same account. There is typically no password, so no logon is required. Everyone has Full access to all shared folders. Cannot use with remote access. Cannot use with Webshare. Each family member has a unique user name and password. They logon to use home computers. Each person can be set up with different shared folder access. Available. Requires a strong password. Available.
Creating Individual User Accounts If family members want to access information on your home network from an Internet café, coffee shop, or other location outside of your home, they need individual user accounts with strong passwords. At least one individual user account with a strong password is also required to create a Webshare Manager and to set up HP Photo Webshare.
3 Click OK on the User Accounts Setup dialog to begin creating user accounts. 4 Click Add, and then complete the Add User Account Wizard. Use only the following characters for names: • • • • Uppercase letters—A, B, C, and so on. Lowercase letters—a, b, c, and so on. Numbers—0, 1, 2, 3, 4, 5, 6, 7, 8, 9 Symbols—use only: dash - underscore _ period .
3 Click Setup under Router. The server tries to configure your broadband router. For more information, see Configuring your broadband router in the Windows Home Server Console Help or see Troubleshooting in this guide. 4 Click Setup under Domain Name. A Domain Name is a Web address. It allows you to access your HP MediaSmart Server and HP Photo Webshare from the Internet. For instance, if you registered MyFamily.hpshare.
3 Click Configure under Webshare Notifications and follow the instructions in the Email Settings wizard. 4 Check users to be Webshare Managers. You can only check users that have remote access enabled and that have strong passwords. If you need to change a user’s account settings, close the Windows Home Server Settings dialog box, and click the User Accounts tab. 5 Select Visitor storage limits. Visitors are friends and family outside your home network that you choose to share Webshare albums with.
Task 6 of 6: Learn more about your HP MediaSmart Server This step does not require any set up. It takes you to the HP MediaSmart Server User’s Guide where you can learn about of the server’s features. On task 6 of the Assistant, click the HP MediaSmart Server User’s Guide link. You can also open the User’s Guide by • Selecting the MediaSmart Server tab of the Windows Home Server Console and clicking Help in the upper right corner.
30 Chapter 3
Chapter 4 Installing on Additional Computers Now you are ready to run the Software Installation Disc on the other computers in your home. After completing the steps in the Assistant on the first computer, use the Software Installation Disc to install the HP MediaSmart Server and Windows Home Server Connector software on the other computers on your home network. Install the software on one computer at time.
Install the Software on Additional Computers NOTE: The HP MediaSmart Server must be on and all of the lights on the front of the server must be solid blue, before installing the software on additional computers. 1 Insert the Software Installation Disc into a computer connected to the home network. You must have administrative privileges to install. For additional information, see (in the installation chapter). 2 Follow the instructions on the installation wizards.
Setting up Additional Home Computers After installing the software on the Software Installation Disc, there are a few setup options for you to consider. • The home computer is automatically set up to be backed up each night. If you want to customize back up settings for this computer, see “Backups” on page 19.
Getting Acquainted with the HP MediaSmart Server Families with several computers in their home are challenged by a proliferation of digital content. Precious and often irreplaceable photos, music, videos, and documents are often scattered across multiple computers or are on remote web pages somewhere on the Internet. The HP MediaSmart Server provides a simple way for family members to access, share, and protect their valuable content.
Chapter 5 Troubleshooting Find solutions for difficulties with your HP MediaSmart Server. The tables below contain basic trouble shooting steps. if they do not resolve the issue or you need assistance in some of the steps described open the HP MediaSmart Server. Open the Help & Support tab and click the User’s guide. If your problem is not listed, consult the HP support web site at http://www.hp.com/support. Common Troubleshooting Tables The tables below contain common trouble shooing steps.
Troubleshooting Tips for the Server Table 1: Common Troubleshooting tips for the Server Question/Issue Probable Cause What to do if the server is unresponsive • • • • 36 Chapter 5 If the server appears to be unresponsive, do either of the following. Answer/Resolution • • Reset the server console. Shutdown and restart manually. Reset the server console. How to reset the server from the Windows Home Server Console. Shutdown and restart manually. How to force the server to turn off and restart.
Table 1: Common Troubleshooting tips for the Server Question/Issue Probable Cause What to do if the server is unresponsive • Power on indicator is off. The server is not powered on. Why is the hard drive light-bar purple? Why is the hard drive light-bar red? Answer/Resolution To force a shutdown and To force a shutdown and restart: restart. 1 On the back of the server, hold in the Power button for at least 4 This should only be done if seconds to force the server to shutdown.
Table 1: Common Troubleshooting tips for the Server 38 Question/Issue Probable Cause Answer/Resolution Why is the server’s health indicator light red? A red Health indicator light has the following states: • • Chapter 5 Additionally, on your computers the Windows Home Server icon is grey on the task tray, which indicates the computer cannot contact Windows Home Server. Solid red—operating system failure. Blinking red—power on test has failed or BIOS failed.
Table 1: Common Troubleshooting tips for the Server Question/Issue Probable Cause Answer/Resolution Computer Recovery PC Restore Disc. Use this disc to restore your computer from the HP MediaSmart Server in the event of the following: Computer Recovery • To restore the system drive. • When the operating system will not start (boot). • If you cannot use Single file Restore to restore the system files. 1 Insert the PC Restore Disc into a CD/DVD drive in the computer you want to restore.
Table 1: Common Troubleshooting tips for the Server Question/Issue Probable Cause Answer/Resolution Temperature warnings. Temperature warning messages indicate that some server components are too hot Temperature warnings. 1 Check the ventilation surrounding the server: • If the server is located in a small unventilated space, move the server to a more ventilated location. • • Check that the server’s front and back panels are not blocked.
Table 1: Common Troubleshooting tips for the Server Question/Issue Probable Cause Answer/Resolution What is a Server Recovery? Why Should I consider a Server Recovery: For detailed steps see the online User’s Guide. • • What is a Factory Reset? Server Recovery attempts to recover all data and restore the folders. Server operating system However, because of the state of the system prior to the recovery, not all data may be able to be recovered or integrated into the folder has been corrupted.
Table 1: Common Troubleshooting tips for the Server Question/Issue Probable Cause Answer/Resolution File transfer failure What to do about a failure when transferring photos or video clips to the HP MediaSmart Server from your computer. File transfer failure 1 2 Compare the files and try transferring the missing files again.
Table 1: Common Troubleshooting tips for the Server Question/Issue Probable Cause If you cannot access the Try the suggested Windows Home Server resolutions Answer/Resolution • • Make sure that all the cable connections are correctly plugged in. • • • Make sure the router (or switch) has power. • Make sure your server and computers are on the same Network. Make sure the HP MediaSmart Server has power and the Network indicator light is blue. Restart the router or switch.
Health Indicator Codes The Tables below are a breakdown of the Health indicator displays. To see this code, using a paper clip, press and release the recessed Status/Recovery button on the front of the server.. Table 2: Health indicator codes Codes when the indicator starts as Solid red 44 Question/Issue Probable Cause Answer/Resolution Solid red—no code Operating system or application error. See Windows Home Server Console for error condition. 1 blue, 2 red System drive failed to boot.
Table 3: Health indicator codes Codes when the indicator starts as Blinking red Question/Issue Probable Cause Answer/Resolution 2 blue, 1 red BIOS corrupted. Repeat power-on to validate. 2 blue, 2 red Memory failure. Contact HP Support. Contact HP Support at http://www.hp.com/support. 2 blue, 3 red BIOS recovery source not present. Check that lower USB port on back of server has new BIOS source. 4 red Memory Failure. Check that Memory is firmly seated in socket.
Troubleshooting Tips for Networking Issues Table 4: Common Troubleshooting tips for Networking 46 Question/Issue Probable Cause Answer/Resolution No available port on network router. Take the following steps: 1 To add more Ethernet ports, connect an Ethernet switch to the router. Refer to the switch documentation for instructions on how it connects to the router. 2 Connect one end of the Ethernet cable that came with the server to the switch and the other end to the HP MediaSmart Server.
Troubleshooting Tips for Common Network Connection Issues Table 5: Common Troubleshooting tips for Network Connection Issues Question/Issue Probable Cause Answer/Resolution The network connection light alternates between blue and off. The server is intermittently connected to the network. Check the cable connection between the server and the router (or switch). Why is the Network connection light off? • • • • To determine why the 1 network connection 2 light is off.
Table 5: Common Troubleshooting tips for Network Connection Issues Question/Issue Probable Cause Why is the Network connection light off? • • 48 Chapter 5 Windows Vista. Windows XP. Answer/Resolution To ensure that Network Discovery is turned on: 1 2 3 Click the Start menu, and then select Control Panel. 4 If Network discovery is off, click , then select Turn on network discovery and Apply. In the Control Panel, click View network status and tasks.
Table 5: Common Troubleshooting tips for Network Connection Issues Question/Issue Probable Cause Why is the Network connection light off? • • Windows Vista. Check the network NetBIOS properties. Answer/Resolution To ensure your network is set up properly for TCP/IP: 1 2 Click Start, and then select Control Panel. 3 4 In the left pane, click Manage Network Connections. 5 If the computer is using a wireless connection, right-click Wireless Network Connection. 6 Click Properties.
Table 5: Common Troubleshooting tips for Network Connection Issues 50 Question/Issue Probable Cause Why is the Network connection light off? • Chapter 5 Windows XP. Answer/Resolution To ensure your network has the correct NetBIOS set up: 1 2 3 4 5 6 7 8 9 10 11 12 Click Start, and then select Control Panel. Double-click Network and Internet connections. Double-click Network Connections. Double-click your default network connection. Local Area Connection for wired networks.
Table 5: Common Troubleshooting tips for Network Connection Issues Question/Issue Probable Cause Why is the Network connection light off? • Windows Vista. Answer/Resolution To ensure your network has the correct NetBIOS set up: 1 2 Click Start, and then select Control Panel. 3 4 5 6 7 8 9 10 11 In the left pane, click Manage Network Connections. Click View network status and tasks under Network and Internet. Right-click your default network connection.
Troubleshooting Tips for Webshare Table 6: Common Troubleshooting tips for Webshare Question/Issue 52 Probable Cause Answer/Resolution Why cannot I share my album? Server users can create albums, but not share them. Detailed information is available in the Online User’s guide. Why cannot a visitor add photos? They need space allocated. Detailed information is available in the Online User’s guide.
Table 6: Common Troubleshooting tips for Webshare Question/Issue Probable Cause How do you make webshare work in the home? Once remote access is To work around this: setup and you have a 1 Replace the {your domain name} section of the URL address with custom domain name, the local name of your server (the default is “hpserver”). frequently urls that look 2 In addition to removing common network issues, this will also something like perform faster. https://{your domain name}/Webshare/ will be used.
Table 6: Common Troubleshooting tips for Webshare Question/Issue Probable Cause Answer/Resolution Clicking on photo Webshare on CC Does Not Open No Default Browser. Select a default browser or reboot PC. Webshare administrator Added visitor as User in cannot delete Visitor WHS Console. account. 54 Add the visitor in webshare instead on in the Admin Console. Visitor can create a photo album and add pictures but the album doesn't display.
Table 6: Common Troubleshooting tips for Webshare Question/Issue Probable Cause Answer/Resolution Visitor has created an album (or albums) and wants to delete the album but cannot. Visitors do not have delete Visitor should delete the photos from the file. The Webshare album rights. administrator has permissions to delete photo albums. Visitor has changed their The Webshare admin has password in Webshare edited the Visitor's to nothing (using password. "Change Password" link).
Table 6: Common Troubleshooting tips for Webshare Question/Issue Probable Cause Clicking on Photo Unknown. Webshare on CC causes command error. Browser cannot display the page when accessing through URL. 56 Chapter 5 Answer/Resolution Click OK on error and attempt to open Photo Webshare again. • • • UPnP disabled. • Websites are turned off. • Multiple DHCP devices • Enable UPnP. • Accessing the server through the URL while behind the same router has known issues.
Troubleshooting Tips for Other Issues Table 7: Common Troubleshooting tips for Other issues Question/Issue Probable Cause Answer/Resolution How to find the server software and firmware information. The Hardware Status page 1 contains information about your HP MediaSmart Server, 2 such as the software and 3 BIOS version. At the computer, double-click the Windows Home Server icon in the task tray. Log on to the Windows Home Server.
Troubleshooting Tips for Other Issues Table 7: Common Troubleshooting tips for Other issues Question/Issue Ideal Minimum time to transfer a 1GB file for different network interfaces? 58 Chapter 5 Probable Cause Answer/Resolution • • • • • • Gigabit Ethernet—8s. Fast Ethernet—1min 20s. Wireless N—13.3s. Wireless G—2min 28s. Wireless A—2min 28s. Wireless B—12min 7s.
Troubleshooting Tips for Internet Router Configuration Table 8: Common Troubleshooting tips for Internet Router Configuration Question/Issue Probable Cause Answer/Resolution How do I manually forward port on my router? Detailed information is available in the Online User’s guide. Why did URL not work? DNS has not updated. Wait 10 minutes for DNS to update.
Troubleshooting Tips for iTunes Table 9: Common Troubleshooting tips for iTunes Question/Issue Probable Cause iTunes aggregator does not appear to be working. • • 60 Answer/Resolution No music in iTunes library. • • Add music to library. Accounts may not match or guest account disabled. • • Fix account synchronization. Wait for the Server to synchronize. Check C:\Program Files\Hewlett-Packard\Media Aggregator.txt. Enable guest account.
Troubleshooting Tips for Upload Photos Table 10: Common Troubleshooting tips for Upload Photos Question/Issue Probable Cause Unable to upload images. • Installs may be blocked by browser security. • Click to enable download/install at top of browser. • Just inserted the drive while Upload photo was loading. • Reinsert the thumb drive. • Pop up blocker blocked install. • Disable pop up blocker, or enable pop ups for the URL. • • ActiveX is disabled. • • Enable ActiveX.
Troubleshooting Tips for Microsoft Table 11: Common Troubleshooting tips for Microsoft 62 Question/Issue Probable Cause Answer/Resolution Server low on space. Clean out unused files. Earmark backups for deletion and 'clean now', delete unused docs from Shared Folders. Cannot connect to server shares. • A duplicate device exists on the network. • Verify that there is no device on the network named "server". • User names and passwords do not match.
Troubleshooting Tips for E-Mail. Table 12: Common Troubleshooting tips for E-Mail Question/Issue Probable Cause Answer/Resolution Why do I need E-mail address for visitors and Home Server users? Webshare has a notification mechanism that uses E-mail to share photos with others. In order for Webshare to send E-mail and notify other users or visitors, you must configure and enable webshare E-mail notification in the administrative console.
Table 12: Common Troubleshooting tips for E-Mail 64 Question/Issue Probable Cause Answer/Resolution If you have chosen to use your own E-mail provider to send Photo Webshare announcements and these E-mail announcements have not been received by the people on your lists. • Ensure that SMTP server information is correct. • SMTP: contact your ISP to insure the information you entered is correct. • Check that you enabled E-mail notification for the group.
Troubleshooting Tips for iTunes Table 13: Common Troubleshooting tips for iTunes Question/Issue Probable Cause iTunes aggregator does not appear to be working. • • Answer/Resolution No music in iTunes library. • • Add music to library. Accounts may not match or guest account disabled. • • Fix account synchronization. Wait for the Server to synchronize. Check C:\Program Files\Hewlett-Packard\Media Aggregator.txt. Enable guest account.
Troubleshooting Tips for Media Streaming. Table 14: Common Troubleshooting tips for Media Streaming Question/Issue Why my files do not show up on DMA? Probable Cause Answer/Resolution Digital Media Adapters (DMA, or Digital Media Receivers - DMR) use the Universal Plug 'n Play (UPnP) protocol to automatically discover Digital Media Servers (DMS). The HP MediaSmart Server uses Windows Media Connect 2.0 (WMC) as its DMS.
Table 14: Common Troubleshooting tips for Media Streaming Question/Issue Probable Cause Why my files do not show up on DMA? • Answer/Resolution Once WMC has been 1 enabled to share a 2 shared folder, it continually monitors the 3 folder for new files.
Table 14: Common Troubleshooting tips for Media Streaming Question/Issue Probable Cause Answer/Resolution Why my files do not show up on DMA? If your DMA does not Verify display WMC from the HP 1 Check that WMC is enabled (use the above steps to get to the MediaSmart Server, or none Media Sharing settings, and verify that at least one of the shared of your files are found by the folders is On) DMA.
Table 14: Common Troubleshooting tips for Media Streaming Question/Issue Probable Cause Answer/Resolution File doesn't appear. File type may not be supported May need to convert file to supported type. Server not showing up. End-user forgot to turn on Media-Sharing. Turn on Media Sharing. Media Files (audio/Video) of supported format aren't seen by device. Possible naming convention issues. Double check names on server, make sure they start with a word, and not a number or symbol.
Troubleshooting Tips for DRM Table 15: Common Troubleshooting tips for DRM Question/Issue Answer/Resolution Why can I play and The HP MediaSmart Server includes a media server for streaming iTunes music to PCs running stream DRM content my iTunes through the house. See the section in the User's Guide on iTunes. home computer but I can not stream it from my HP For Windows Media DRM (WMDRM) content (protected .wma music and .
Troubleshooting Tips for TZO/DNS Table 16: Common Troubleshooting tips for TZO/DNS Question/Issue Probable Cause Why did URL not work? DNS server might not have Wait about 10 minutes for DNS to update and try again. updated. What value does TZO domain names provide beyond the Microsoft Live option: Answer/Resolution • TZO provides automatic E-mail notifications to Webshare visitors that new photos are available without having to set up an SMTP E-mail server.
72 Chapter 5
