HP MediaSmart Server - Installation and Troubleshooting Guide

Troubleshooting 45
Table 3: Health indicator codes Codes when the indicator starts as Blinking red
Question/Issue Probable Cause Answer/Resolution
2 blue, 1 red BIOS corrupted. Repeat power-on to validate.
2 blue, 2 red Memory failure. Contact HP Support. Contact HP Support at
http://www.hp.com/support .
2 blue, 3 red BIOS recovery source not
present.
Check that lower USB port on back of server has new BIOS source.
4 red Memory Failure. Check that Memory is firmly seated in socket.