HP Firewall Series - HP AF5000-CMW520-R3206P22 Release Notes
7
HSD85021
Symptom: The internal server cannot communicate with itself through its public address.
Condition: This symptom might occur when NAT server is configured on the F5000-A5.
HSD85020
Symptom: The maximum number of DNS mapping entries that F5000-A5 supports is less than 256.
Condition: None
HSD78997
Symptom: The stack reboots after the F5000-A5 operates for a period and dynamic .
Condition: This symptom might occur when stateful failover is configured and the status of a dynamic
aggregation group's member interfaces change frequently.
HSD81025
Symptom: The F5000-A5 outputs an exception report message and reboots.
Condition: This symptom might occur when the default domain uses RADIUS authentication and a user
logs in through the Web interface.
HSD78486
Symptom: Traffic that flows in from one subinterface on a 2*10-GE interface module and flows out of
another subinterface of the same interface is lost.
Condition: This symptom might occur when the F5000-A5 has operated for a long period and the CPU's
receive buffer is full.
HSD73095
Symptom: Traffic that flows in from one subinterface on a 2*10-GE interface module and flows out of
another subinterface of the same interface is lost.
Condition: This symptom might occur when a lot of traffic needs to be forwarded between the two
subinterfaces in a short period of time.
HSD72095
Symptom: When the F5000-A5 has two 2*10-GE interface modules and the interfaces with the number 1
both receive large amounts of packets, many packets are lost.
Condition: This symptom might occur when the F5000-A5 has two 2*10-GE interface modules and the
interfaces with the number 1 both receive large amounts of packets.
HSD71094
Symptom: The logic of an interface module stops forwarding when the traffic is continuously more than
3G.
Condition: This symptom might occur when NAT and virtual firewall are configured and the traffic is
continuously more than 3G.
Resolved problems in
SECPATH5000FA-CMW520-R3206P01
None