HP Firewall Series - HP AF5000-CMW520-R3206P22 Release Notes

25
....................................................Done!
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is cfa0 |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-5):
When you enter a number in the range of 1 to 4 and the system detects that a file with the same name
exists on the firewall, the system gives you a message and asks you whether to overwrite the existing file.
 Enter Y, and the file is updated.
 Enter N, and the existing file is not changed. The upgrading fails.
4. Enter 0 to return to the BootWare menu, and then enter 1 to boot the system.
Using XMODEM to upgrade software through the console port
1. Enter 2 in the BootWare menu to access the Serial submenu.
===========================<Enter Serial SubMenu>===========================
|Note:the operating device is cfa0 |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-5):
Table 11 Serial submenu options
Item
Description
<1> Download Application Program To SDRAM And
Run
Download an application to SDRAM through the serial
port and run the program.
<2> Update Main Application File
Upgrade the main system software image.
<3> Update Backup Application File
Upgrade the backup system software image.
<4> Update Secure Application File
Upgrade the secure system software image.
<5> Modify Serial Interface Parameter
Modify serial port parameters
<0> Exit To Main Menu
Return to the BootWare menu.
NOTE:
If you use the baud rate of 9600 bps, jump to step 10.
2. Enter 5 to enter the baud rate setting menu.
===============================<BAUDRATE SET>===============================
|Note:'*'indicates the current baudrate |