HP Firewall Series - HP AF5000-CMW520-R3206P22 Release Notes

Item

Specifications

CPLD

MPU: Basic section 3.0 , extended section 1.0

LPUA: Basic section 1.0, extended section 1.0

GE interface module: 2.0

10-GE interface module: 1.0

BootWare version

1.09

Host software

SECPATH5000FA-CMW520-R3206P22.bin

iMC version

iMC PLAT 7.0 (E0102)

To display the host software and BootWare version of the F5000-A5, perform the following:

<Sysname>display version

HP Comware Platform Software

Comware Software, Version 5.20, Release 3206P22 ------- Note

①

HP A-F5000 uptime is 0 week, 1 day, 5 hours, 31 minutes

CPU type: RMI XLR732 1000MHz CPU

3584M bytes DDR2 SDRAM Memory

4M bytes Flash Memory

247M bytes CF0 Card

MPUA PCB Version:Ver.B

SWBA PCB Version:Ver.A

MPUA Basic Logic Version: 3.0

MPUA Extend Logic Version: 1.0

SWBA Logic Version: 1.0

MPUA LX30T FPGA Version: 5.05

Basic BootWare Version: 1.07

Extend BootWare Version: 1.09 ------- Note②

[FIXED PORT] CON (Hardware)Ver.B, (Driver)1.0, (Cpld)3.0

[FIXED PORT] AUX (Hardware)Ver.B, (Driver)1.0, (Cpld)3.0

[FIXED PORT] M-GE0/0 (Hardware)Ver.B, (Driver)1.0, (Cpld)3.0

[SUBSLOT 1] The SubCard is not present

[SUBCARD 2] NSQ1GT8C40 (Hardware)Ver.B, (Driver)1.0, (Cpld)1.0

[SUBSLOT 3] The SubCard is not present

[SUBSLOT 4] The SubCard is not present

Upgrading restrictions and guidelines

Known hardware bus bug

When virtual packet reassembling is enabled, the SPI4.2 bus can process only the first five fragments of a

packet, resulting in fragment loss.

Known PHY chip bug

In forced mode, the BCM 5464 chip does not support automatic cross-over/straight-through adaption. As a

result, a cross-over cable is required to connect two BCM 5464 chips operating in forced mode. If a

straight-through cable is used instead, the link layer cannot come up. The BCM 5464 chip is used on the 12-GE

interface module for the F5000-A5.