IB4X-00 (ib) B.11.31.1303 HP Fabric Clustering System for InfiniBand Driver Release Notes

Table 2 HP-UX March 2012 (AR1203) Fixes
DescriptionDefect ID
Infiniband release B.11.31.1103 excludes PCI-X adapter from description. This issue has been
fixed.
QXCR1001132985
Netfmt command was giving core dumps in "nice" while printing of infiniband data. This issue
was due to the misalignment in the code and it is fixed now.
QXCR1001136764
IB HBA firmware update needed to prevent SDR/DDR negotiation problems . This has been fixed
by updating the new card firmware.
QXCR1001149978
Itutil command displays incorrect speed for QDR card.QXCR10011447829
The ib_t driver module failed to unload due to internal CRA library error.QXCR1001149999
Persistent ERROR messages in syslog regarding IB QDR card AT083A due to incorrect logic in
the code.
QXCR100112789
Table 3 HP-UX September 2011 (AR1109) Fixes
DescriptionDefect ID
This message incorrectly appeared in dmesg when the card already has the higher version of
the firmware:ib_t: Firmware version on the HCA is old. Please use 'itutil'
to upgrade it to the 2.5.0 version of the fw. This is fixed now.
QXCR1001105551
The command
itutil -d switch_fw interface_name spigot_id
QXCR1001105552
to display the firmware version of the switch displayed invalid values. This defect is fixed now.
Table 4 HP-UX March 2011 (AR1103) Fixes
DescriptionDefect ID
The IB4X-00 driver is enhanced to support the InfiniBand QDR Mezzanine card 512519–B21
on HP Integrity blade servers.
QXCR1001043163
The IB4X-00 driver is enhanced to support the InfiniBand QDR Standup card AT083A on
Superdome 2 and rx2800 i2 systems.
QXCR1001064478
Table 5 HP-UX August 2010 (WEB1008) Fixes
DescriptionDefect ID
The IB4X-00 driver is enhanced to support the InfiniBand QDR Mezzanine card 512519–B21
on HP Integrity blade servers.
QXCR1001043163
The nettl message logs as an ERROR, when the processing time of an event exceeds the allowed
time; therefore, it needs to be changed to WARNING.
QXCR1001031504
Table 6 HP-UX March 2010 (AR1003) Fixes
DescriptionDefect ID
Opening device file </dev/ib_subsys> resulted in a system panic. This occurred regardless of
whether or not the IB adapter was installed. This problem has now been fixed.
QXCR1000968186
4