IB4X-00 (ib) B.11.31.1303 HP Fabric Clustering System for InfiniBand Driver Release Notes

In this scenario the driver can be successfully resumed by resetting the IPOIB module with the
itutil command. The syntax is:
itutil -R interface_name
For example: itutil –R ib0
Compatibility and installation requirements
This section describes the compatibility information and installation requirements for this release.
For specific compatibility requirements, refer to the HP Fabric Clustering System for InfiniBand
Support Matrix, which can be found at http://www.hp.com/go/hpux-iocards-docs, under the HP
Fabric Clustering System for InfiniBand section.
Operating system and version compatibility
This release is specific for HP-UX 11i v3.
Supported Firmware
Table 11 Supported Firmware
Firmware versionsAdapter TypeHB HCA Product NumberIB HCA Product Name
2.9.1000PCI-Express,AT083ADual port QDR Stand up Card
4X InfiniBand QDR
2.9.1000PCI-Express
Mezzanine,
592519-B21Dual port QDR Mezzanine card
4X InfiniBand QDR
2.9.1000PCI-Express,AH304ADual port DDR standup card
4X InfiniBand DDR
2.9.1000PCI-Express
Mezzanine,
448262-B21Dual port DDR Mezzanine card
4X InfiniBand DDR
4.7.928PCI-Express,AD313ADual port DDR Standup Arbel
Chipset
4X InfiniBand DDR
1.2.0PCI-Express
Mezzanine,
410533-B21Single port DDR Mezzanine
card
4X InfiniBand DDR
3.5.0PCI-X, 2-port 4X
InfiniBand SDR
AB345ADual port SDR standup card
3.5.0PCI-X, 2-port 4X
InfiniBand SDR
AB345C (RoHS)Dual port SDR standup card
3.5.0PCI-X, 2-port 4X
InfiniBand SDR
AB286ADual port SDR standup card
3.5.0PCI-X, 2-port 4X
InfiniBand SDR
AB286CDual port SDR standup card
Driver versions
The following table lists all the driver versions of the HP IB4X-00 driver for InfiniBand, with their
associated release names and dates.
Compatibility and installation requirements 7