IB4X-00 (ib) B.11.31.1403 HP Fabric Clustering System for InfiniBand Driver Release Notes

Mar 23 14:48:51 c7ioc511 vmunix: HP-InfiniBand:
/ux/core/isu/IBand/kern/src/common/ib_tvr/ib_tvr_osb.c: 5744: :
Error completion on HCA:0, CQN:0x8e, QPN:0x4c syndrome: 0xd802
In this scenario the driver can be successfully resumed by resetting the IPOIB module with the
itutil command. The syntax is:
itutil -R interface_name
For example: itutil –R ib0
Compatibility and installation requirements
This section describes the compatibility information and installation requirements for this release.
For specific compatibility requirements, refer to the HP Fabric Clustering System for InfiniBand
Support Matrix, which can be found at http://www.hp.com/go/hpux-iocards-docs, under the HP
Fabric Clustering System for InfiniBand section.
Operating system and version compatibility
This release is specific for HP-UX 11i v3.
Supported Firmware
Table 13 Supported Firmware
Firmware versionsAdapter TypeHB HCA Product NumberIB HCA Product Name
2.9.1530PCI-Express,AT083ADual port QDR Stand up Card
4X InfiniBand QDR
2.9.1000PCI-Express
Mezzanine,
592519-B21Dual port QDR Mezzanine card
4X InfiniBand QDR
2.9.1000PCI-Express,AH304ADual port DDR standup card
4X InfiniBand DDR
2.9.1000PCI-Express
Mezzanine,
448262-B21Dual port DDR Mezzanine card
4X InfiniBand DDR
4.7.928PCI-Express,AD313ADual port DDR Standup Arbel
Chipset
4X InfiniBand DDR
1.2.0PCI-Express
Mezzanine,
410533-B21Single port DDR Mezzanine
card
4X InfiniBand DDR
3.5.0PCI-X, 2-port 4X
InfiniBand SDR
AB345ADual port SDR standup card
3.5.0PCI-X, 2-port 4X
InfiniBand SDR
AB345C (RoHS)Dual port SDR standup card
3.5.0PCI-X, 2-port 4X
InfiniBand SDR
AB286ADual port SDR standup card
3.5.0PCI-X, 2-port 4X
InfiniBand SDR
AB286CDual port SDR standup card
8