HP9000 PCI FDDI Release Notes for HP-UX 10.20, 11.0 and 11i

HP9000 PCI FDDI Release Note - 11i

Patches and Fixes in This Version

Fixes for 11i

The ﬁxes for the following symptoms are included in this version.

1. Messages similar to the following are seen either on the system console or in the system

log ﬁle (/var/adm/syslog.log) by default for the A and B class systems with a non

cache-coherent I/O that has the PCI FDDI card and driver installed.

vmunix: FDDI[2]WARNING: cmd=0 failure Status=lcee90

2. The PCI FDDI link is dropped when the system is heavily loaded and the card is reset by

the driver for some reason. The ﬁx for this symptom depends on the DLPI Patch #

PHNE_22963.

3. The PCI FDDI driver init script will fail during bootup if any entries in the PCI FDDI

conﬁguration ﬁle were invalid.