AD300A Fibre Channel Mass Storage Adapter Installation Guide, May 2007

Fibre Channel Adapter Installation for HP-UX
Installing Adapter Hardware
Chapter 1
9
CAUTION Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD
safety precautions could result in damage to equipment.
NOTE The optical port protector is used only to protect the adapter port when it is not in use. Do not
use the protector as a diagnostic tool.
Install OnlineDiag, which is available at http://www.software.hp.com. OnlineDiag is also available from the
HP Support PLUS CD for PA-RISC systems or the IPF CD for Itanium
-based systems. Installation
instructions are available at: http://docs.hp.com/hpux/onlinedocs/diag/st/st_inst.htm
Install all driver software and dependency patches before you install the adapter. See the FibrChanl-01 (fcd)
Fibre Channel Mass Storage Driver Release Notes available at: http://docs.hp.com for details.
For installation instructions see the system documentation.
Figure 1-1 AD300A Dual Port Fibre Channel Adapter