AH400A/AH401A - HP PCIe 8Gb 1 port, 2 port, and 4Gb Fibre Channel QLogic HBAs using Linux, Windows, and HP-UX OS's Installation Guide, October 2008

Example 4-1 Example of the “fcmsutil /dev/fcd5” command
# fcmsutil /dev/fcd5
Vendor ID is = 0x1077
Device ID is = 0x2532
PCI Sub-system Vendor ID is = 0x103C
PCI Sub-system ID is = 0x3263
PCI Mode = PCI Express x8
ISP Code version = 4.3.2
ISP Chip version = 2
Topology = PTTOPT_FABRIC
Link Speed = 8Gb
Local N_Port_id is = 0x010e00
Previous N_Port_id is = None
N_Port Node World Wide Name = 0x50014380023cb8fb
N_Port Port World Wide Name = 0x50014380023cb8fa
Switch Port World Wide Name = 0x200e00c0dd0d78f6
Switch Node World Wide Name = 0x100000c0dd0d78f6
N_Port Symbolic Port Name = vmj231_fcd5
N_Port Symbolic Node Name = vmj231_HP-UX_B.11.31
Driver state = ONLINE
Hardware Path is = 0/4/0/0/0/1
Maximum Frame Size = 2048
Driver-Firmware Dump Available = NO
Driver-Firmware Dump Timestamp = N/A
Driver Version = @(#) fcd B.11.31.0809.%319 Jul 7 2008
This card is capable of running at bus speeds up to PCI-e x8 link width. The actual link width is
displayed as the PCI Mode.
22 Installing HBAs for HP-UX operating systems