AH400A/AH401A - HP PCIe 8Gb 1 port, 2 port, and 4Gb Fibre Channel QLogic HBAs using Linux, Windows, and HP-UX OS's Installation Guide, October 2008

HBA LEDs
Figure 5-1 Dual Channel HBA
Figure 5-2 shows the LEDs that are referenced in this document.
Figure 5-2 LED location
Using the Event Viewer
The miniport drivers verify the condition of the HBA's POST LED states. If there is a failure or
a suspected failure, an error log entry appears in the Windows Event Log. Use the Event viewer
to access the Event log
To open the Event Viewer:
1. Click Start > Programs > Administrative Tools > Event Viewer, or right-click My Computer
and select Manage.
2. Click Event Viewer in Computer Management. The Event Viewer window appears.
3. See the website http://www.qlogic.com/support/logs/evlogV9xxx_error.asp for information
about interpreting the event codes.
Viewing the Event log
Use the following procedure to view the event log.
1. Click Start > Programs > Administrative Tools >Event Viewer, or right-click My Computer,
and then select Manage.
2. Click Event Viewer in Computer Management.
The Event Viewer window appears.
3. See the website http://www.qlogic.com/support/logs/evlogV9xxx_error.asp for information
about interpreting the event codes.
28 Troubleshooting