AH402A/AH403A HP PCIe 8Gb 1 port and 2 port Fibre Channel Emulex HBAs using Windows and HP-UX Installation Guide, Second Edition

1 HBA specifications
This chapter contains the HBA specifications, including:
• Environmental specifications
• Physical specifications
• HBA media specifications
Environmental specifications
Table 1-1 “Environmental specifications” lists the HBAs environmental specifications.
Table 1-1 Environmental specifications
MaximumMinimumEnvironment
55°C/131°F0°C/32°FOperating temperature
70°C/158°F–20°C/–40°FStorage temperature
95%5%Relative humidity (non-condensing)
N/A100 lf/minute (minimum)Airflow
Physical specifications
Table 1-2 lists the physical specifications.
Table 1-2 Physical Specifications
RangeParameter
The controller interfaces to the physical media through an FC-0 Media Interface (FC-PI
compliant transceiver), and then connects through a single or dual optical fiber LC connector.
Media interface
Low-profile MD2 form factor, 6.600 inches by 2.536 inches. Accommodates both the full-height
and low-profile bracket.
Physical dimensions
PCI-e x4 slot
• In a PCI-e x4 slot
— 5.9 watts (typical) at +3.3 VDC
— 8.5 watts (maximum) at 3.3 VDC
Power requirements
• Class 1 Laser Product per DHHS 21CFR (J) & EN60825-1
• UL recognized to UL60950-1:2003
• CUR recognized to CSA 22.2, No. 60950-1-03
• Baurt-certified by TUV to 60950-1
• FCC Rules, Part 15, Class A
• Industry Canada, ICES-003, Class A
• EMC Directives 89/336/EEC and 2004/108/EC (CE Mark)
• EN55022, Class A
• EN55024
• Australian EMC Framework (C-Tick Mark)
• AS/NZS CISPR22:2002 Class A
• Japan VCCI, Class A
• Taiwan BSMI, Class A
• Korea MIC, Class A
Agency approvals
Environmental specifications 13