AH402A/AH403A HP PCIe 8Gb 1 port and 2 port Fibre Channel Emulex HBAs using Windows and HP-UX Installation Guide, Second Edition

HBA LEDs
Figure 4-1 Single and dual channel HBAs
Figure 4-2 “LED location” shows the LEDs that are referenced in this document.
Figure 4-2 LED location
See Table 4-1 (page 19) for a description of the LEDs.
Using the Event viewer
The miniport drivers verify the condition of the HBA's POST LED states. If there is a failure or
a suspected failure, an error log entry is issued to the Windows event log.
Viewing the Event log
Use the following procedure to view the Event log.
1. Click Start > Programs > Administrative Tools >Event Viewer, or right-click My Computer
and select Manage.
2. Click Event Viewer in Computer Management.
The Event Viewer window appears.
3. See Windows miniport event log codes for information about interpreting the event codes.
Accessing the Windows miniport event log codes
To obtain the relevant documentation from the Smart Component kit you used to install the
driver:
1. Click the Smart Component.
2. Click EXTRACT.
20 Troubleshooting Under the Windows Environment