FibrChanl-01 (fcd) Fibre Channel Mass Storage Driver for HP-UX 11i v2 release notes Version Number B.11.23.1009 HP Part Number: 5900-0901 Published: September 2010 Edition: 8.
Legal Notices © Copyright 2010 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor’s standard commercial license. The information contained herein is subject to change without notice.
Table of Contents FibrChanl-01 (fcd) Fibre Channel Mass Storage Driver for HP-UX 11i v2 Overview...........................5 New and Changed Features in This Release..........................................................................................5 Defect Fixes.............................................................................................................................................5 Driver Versions.....................................................................................
List of Tables 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 4 HP-UX 11i v2 September 2010 Application Release (AR1009)Fixes...............................................5 HP-UX 11i v2 March 2010 (WEB1003)Fixes....................................................................................5 HP-UX 11i v2 November 2009 Fixes...............................................................................................5 HP-UX 11i v2 September 2009 Fixes.................................................
This document provides information about the B.11.23.1009 release of the FibrChanl-01 (fcd) Fibre Channel Mass Storage Driver for HP-UX 11i v2. FibrChanl-01 (fcd) Fibre Channel Mass Storage Driver for HP-UX 11i v2 Overview This release of the FibrChanl-01 (fcd) Fibre Channel Mass Storage Driver for HP-UX 11i v2 (version B.11.23.1009) provides fixes for defects listed in Table 1. New and Changed Features in This Release There are no new features with this release.
Table 6 HP-UX 11i v2 November 2008 Fixes Defect ID QXCR1000862281 Description The call to SNIA API HBA_GetFcpTargetMapping()from within an application creates defunct processes i.e. processes do not get terminated when application terminates. This has been fixed in 11i v2, in SNIA vendor library for FCD driver.
Table 12 HP-UX 11i v2 December 2006 Fixes Defect ID Description SR: 8606456492 Fixed a problem which caused unexpected data to be displayed when the fcmsutil read_cr option is used with 2 Gb fibre channel HBAs. SR: 8606449173 Fixed a problem in which firmware reports a fatal error was detected on 4 Gb fibre channel HBAs. SR: 8606454863 Fixed a problem in which the fcd driver reports a “Mailbox 0x69 Timeout.
Table 16 HP-UX 11i v2 March 2005 Fixes (continued) Defect ID Description SR: 8606380621 Calling HBA_SendCTPassThru() with a large ReqBufferSize may cause a panic SR: 8606381090 HBA_GetFcpTargetMapping() can affect normal access to tape SR: 8606390263 VxVM interoperability issue with the fcd driver, due to first open time of 30 sec.
Table 18 FibrChanl-01 (fcd) Driver Version History Release Revision September 2010 B.11.23.1009 March 2010 B.11.23.1003.01 November 2009 B.11.23.0911 September 2009 B.11.23.0909 March 2009 B.11.23.0903 November 2008 B.11.23.0811 September 2008 B.11.23.0809 July 2008 B.11.23.0807 March 2008 B.11.23.0803 December 2007 B.11.23.08.02 September 2007 B.11.23.08.01 April 2007 B.11.23.08 December 2006 B.11.23.07 September 2006 B.11.23.06 June 2006 B.11.23.
6. • Look for EFI 1.49 or later for adapters A6826A, A9782A, A9784A, and AB465A. Look for EFI 1.05 or later for adapters AB378A and AB379A. Configuring an Alternate Path on the Same 2–Port HBA as the Primary Path On midrange and high end Integrity servers, if the primary and alternate boot devices are on the same Fibre Channel HBA port, an attempt to manually boot from the alternate device will fail. For example, if your primary and alternate paths are set as follows: Primary bootpath: 0/0/10/1/0/4/0.8.0.
Corrective Action: Refer to Hardware Requirements later in this document for more information. Compatibility and Installation Requirements This section describes the compatibility information and installation requirements for this release. For specific installation instructions, refer to the installation guide specific to your FibreChannel card.
Table 19 Recommended Firmware Versions (March 2010 or later) (continued) Fibre Channel Adapter EFI Driver Version Firmware Version A9784A 1.49 or later 3.03.154 or later AB465A 1.49 or later 3.03.154 or later For current recommended firmware versions, see the HP Fibre Channel (fcd and fclp) Host Bus Adapter Support Matrix at http://docs.hp.com/en/netcom.
