FibrChanl-01 (fcd) B.11.23.1009 Fibre Channel Mass Storage Driver Release Notes, Edition 8.0 (September 2010)

Table 18 FibrChanl-01 (fcd) Driver Version History
RevisionRelease
B.11.23.1009September 2010
B.11.23.1003.01March 2010
B.11.23.0911November 2009
B.11.23.0909September 2009
B.11.23.0903March 2009
B.11.23.0811November 2008
B.11.23.0809September 2008
B.11.23.0807July 2008
B.11.23.0803March 2008
B.11.23.08.02December 2007
B.11.23.08.01September 2007
B.11.23.08April 2007
B.11.23.07December 2006
B.11.23.06September 2006
B.11.23.05 (64-bit)June 2006
B.11.23.04.01 (64-bit)December 2005
B.11.23.03 (64-bit)March 2005
B.11.23.02 (64-bit)September 2004
Known Problems and Limitations
This section provides a list of known problems and limitations as known to HP at time of
publication. If workarounds are available, they are included.
• EFI SEARCH Causes Boot to Fail on rx7640, rx8640, and sx2000 Superdome Server Systems
Running the SEARCH command at the EFI shell on rx7640, rx8640, and HP Integrity
Superdome/SX2000 server systems can cause the system to fail to boot through a Fibre
Channel HBA. rx7640 systems have a built-in SEARCH of slot 7. Affected 2Gb Fibre Channel
HBAs are: A6826A, A9782A, A9784A, and AB465A with EFI driver version 1.47 or earlier.
Affected 4Gb Fibre Channel HBAs are: AB378A and AB379A with EFI driver version 1.01.
The boot will fail with a message similar to the following:
Load of HP-UX
Primary Boot: 1.0.1/1/0/4/0.8.0.255.0.6.0 failed: Not Found
Corrective Action: A fix in the 2Gb/4Gb drivers has been released. The following steps will
resolve the issue:
1. Go to www.hp.com
2. Click Software & Driver Downloads.
3. In the white text box, type the name of the I/O card, such as A6826A.
4. Click the >> button.
5. Click the Cross Operating System button.
Known Problems and Limitations 9