FibrChanl-01 (fcd) B.11.23.1205 Fibre Channel Mass Storage Driver for HP-UX 11i v2 Release Notes (May 2012)

Table 17 HP-UX 11i v2 March 2005 Fixes (continued)
DescriptionDefect ID
set_int_delay command does not display any message
when command is successful
SR: 8606392547
fcmsutil: does not check to discover if too many
parameters have been given
SR: 8606392748
The vgcfgbackup command hangs with the fcd driverSR: 8606395620
A6826A HBA is not coming online when connected to an
8 port Brocade switch
SR: 8606395543
The fcd driver is not seeing devices through the Cisco MDS
9000 family of switches
SR: 8606369480
SAN configuration changes might lead to boot failure from
devices seen by the fcd driver
SR: 8606394349
Table 18 HP-UX 11i v2 September 2004 Fixes
DescriptionDefect ID
SNIA HBA API GetPortStatistics() returns
HBA_STATUS_ERROR
SR: 8606346794
Under heavy IO load ioscan display LUNs behind certain
devices as NO_HW
SR: 8606348536
HP-UX Start-up status no longer fits on standard 80x24
console
SR: 8606351283
Miscellaneous Fixes in IO pathSR: 8606356804
Online Adapter ROM update command hangsSR: 8606353003
File descriptor leak in SNIA API for TargetMapping and
PersistentBinding
SR: 8606364880
SNIA HBA API functions may return
HBA_STATUS_ERROR_UNAVAILABLE for correctly installed
SR: 8606358270
HBAs; SNIA HBA API function HBA_SendCTPassThru() may
hang
Ioscan problems with FCP array using
PeripheralDeviceAddressing lun addressing method
SR: 8606360197
VxVM DMP interoperability problemSR: 8606368844
FCP-2 error recovery doesn't occur following a short cable
break
SR: 8606369477
Driver Versions
The driver versions for each release of the FibrChanl-01 (fcd) driver:
Table 19 FibrChanl-01 (fcd) Driver Version History
RevisionRelease
B.11.23.1205May 2012
B.11.23.1009September 2010
B.11.23.1003.01March 2010
B.11.23.0911November 2009
B.11.23.0909September 2009
8 FibrChanl-01 (fcd) Fibre Channel Mass Storage Driver for HP-UX 11i v2