FibrChanl-01 (fcd) B.11.31.1003 Fibre Channel Mass Storage Driver Release Notes, Edition 1.1 (October 2010)
Table 5 HP-UX March 2008 Fixes
DescriptionDefect ID
Added Symbolic Name support. Symbolic Names are user friendly names assigned to SAN
components, and registered with the name server of an FC switch. FC switches display the
registered symbolic names, which can be used by users to correlate SAN components across
multiple servers and storage.
Display fcd controller symbolic port and node names from HP-UX:
# /opt/fcms/bin/fcmsutil /dev/fcdl
fcd controller symbolic port and node names are displayed as N_Port Symbolic Port Name
and N_Port Symbolic Node Name.
QXCR1000754446
Table 6 HP-UX September 2007 Fixes
DescriptionDefect ID
Enable DLKM for 11.31SR: 8606477107
Support online transceiver diagnostics – sfpSR: 8606479804
Avoid use of /tmp file for driver dumpsSR: 8606477715
Modify FCD dump driver to support > 2TB LUNsSR: 8606466124
Known problems and limitations
This section provides a list of known problems and limitations as known to HP at time of publication.
If workarounds are available, they are included.
• Some PCIe I/O backplanes do not support PCIe2 (5.0 GT/s) cards on slots 3 and 4
PCIe I/O backplanes with product number AD295A #200 on rx3600, AD296A #200 on
rx6600, and upgrade product number AD298A for both rx3600 and rx6600 Integrity servers,
do not support PCIe2 (5.0 GT/s) cards on slots 3 and 4. PCIe2 cards will not be seen when
seated in these slots.
PCIe I/O backplanes with the product numbers AD295A #300, AD296A #300, and AD230A,
do support PCIe2 cards on slots 3 and 4. PCIe2 cards will be seen, and will run in PCIe mode
(2.5 GT/s) when seated in these slots.
Both backplanes will be able to support PCIe2 cards running in PCIe mode on slots 5 and 6.
To determine the installed backplane using the FRU ID:
1. Establish a telnet session with the iLO MP.
2. Logon to the iLO MP using the Admin password.
3. Type CM to enter the Command Menu.
4. Type DF to enter the Display FRU Information Menu.
5. Type S to display a list of specific FRUs.
6. Type 05 for the I/O Assembly FRU.
◦ For AD295A #200, AD296A #200, and AD298A, the Product Name displays as:
10 Slot PCI-E IOBP
◦ For AD295A #300, AD296A #300, and AD230A, the Product Name displays as:
10 Slot PCI-E 1.1 IOBP
• If a system is low on available contiguous memory, an online addition can fail
The failure will be seen with messages similar to the following:
#sd10vp3 :/> olrad -A 8-0-1-5
Activity : Start of Post Add
Target slot : 8-0-1-5
4