FibrChanl-01 (fcd) B.11.31.1003 Fibre Channel Mass Storage Driver Release Notes, Edition 1.1 (October 2010)

Table 7 Recommended firmware versions (March 2010) (continued)
Firmware versionEFI driver versionFibre channel adapter
4.00.90 or later1.09 or later403619-B21 (with VC-FC boot
support in BL860c)
4.00.70 or later1.05 or laterAD300A
4.00.70 or later1.05 or laterAB378A
4.00.70 or later1.05 or laterAB378B
4.00.70 or later1.05 or laterAB379A
4.00.70 or later1.05 or laterAB379B
3.03.154 or later1.49 or laterA6826A
3.03.154 or later1.49 or laterA9782A
3.03.154 or later1.49 or laterA9784A
3.03.154 or later1.49 or laterAB465A
For current recommended firmware versions, see the HP Fibre Channel Host Bus Adapter Support
Matrix at http://docs.hp.com/en/netcom.html#Fibre%20Channel
NOTE: Display EFI driver and ROM firmware versions using fcmsutil <fcd_device_file>
vpd
EFI/firmware bundles can be downloaded from www.hp.com, in the Software and Driver Downloads
section.
Driver versions
The following table lists all the driver versions of the fcd driver on HP-UX 11i v3 with their associated
release names and dates.
Table 8 Table of Driver Versions
Release DateDriver VersionRelease Name
February 2007B.11.31Initial 11.31 Support
September 2007B.11.31.0709Application Release 0709
March 2008B.11.31.0803Application Release 0803
September 2008B.11.31.0809Application Release 0809
March 2009B.11.31.0903Application Release 0903
September 2009B.11.31.0909Application Release 0909
March 2010B.11.31.1003Application Release 1003
Hardware requirements
This version of the FibrChanl-01 (fcd) Fibre Channel Mass Storage Driver for HP-UX 11i v3 runs
on HP Integrity servers with the HP-UX 11i v3 (11.31) operating system, as well as on HP PA
servers. It supports Fibre Channel hardware products such as:
• 451871-B21 Dual Port PCIe 8 Gb Mezzanine Fibre Channel Adapter
• AH401A Dual Port PCIe 8Gb Fibre Channel Adapter
• AH400A Single Port PCIe 8Gb Fibre Channel Adapter
8