FibrChanl-01 (fcd) B.11.31.1105 Fibre Channel Mass Storage Driver for HP-UX 11i v3 Release

This document provides information about the B.11.31.1105 release of the FibrChanl-01 (fcd)
Fibre Channel Mass Storage Driver for HP-UX 11i v3.
FibrChanl-01 (fcd) Fibre Channel Mass Storage Driver for HP-UX 11i v3
overview
This release of the document for the FibrChanl-01 (fcd) Fibre Channel Mass Storage Driver for
HP-UX 11i v3 (version B.11.31.1105) documents version changes and defect fixes.
New and changed features in this release
New features
The following feature is new with the B.11.31.1105 version of the FibrChanl-01 (fcd) Fibre Channel
Mass Storage Driver for HP-UX 11i v3:
• There are no new features for this release.
Known problems fixed in this version
The following issues have been fixed in the FibrChanl-01 (fcd) Fibre Channel Mass Storage Driver
for HP-UX 11i v3 May 2011 (WEB1105) release. To view the entire details of each issue fix, refer
to the HP IT Resource Center at: http://forums1.itrc.hp.com/service/forums/home.do
Table 1 HP-UX May 2011 (WEB1105) Fixes
DescriptionDefect ID
This fixes an issue in Qlogic 8Gb FC Firmware that enables it to use correct slot-specific SerDes
settings for the 8Gb PCIe Dual Port Mezzanine Fibre Channel Adapter.
QXCR1001123656
Table 2 HP-UX March 2011 (AR1103) Fixes
DescriptionDefect ID
SNIA: FC Instance Enumeration FCPortControllerCollection fails if port disabled.QXCR1001020559
SNIA: FC Provider dumps core during CHO test.QXCR1001073517
This fixes the issue where the fcd driver does not restore the Symbolic Names to their default
values when requested through scsimgr.
QXCR1001051386
This fixes a memory leak in the fcd driver after executing certain fcmsutil echo, test, and
rls commands.
QXCR1001041080
This fixes a memory leak in the fcd driver after executing certain fcmsutilns_query_ports
command.
QXCR1001083355
This fixes the issue where the fcmsutilstat command is displaying the unneeded SBC hit
counter statistic for the 2Gb Fibre Channel Adapter.
QXCR1001060235
This fixes the issue where ioscan is displaying the wrong Part Number for the 4Gb Dual Port PCIe
Mezzanine Fibre Channel Adapter.
QXCR1001083067
Table 3 HP-UX September 2010 (AR1009) Fixes
DescriptionDefect ID
This fixes the issue where rmsf can hang when trying to delete the stale device special file on
the FC port that is no longer available or waiting for a link-up. The rmsf hang can further cause
subsequent hang in other commands (e.g. ioscan, olrad, network access).
QXCR1000984392
This fixes the issue where the timer list in the driver is corrupted, resulting in a panic with
Spinlock held too long!!
QXCR1000924185
FibrChanl-01 (fcd) Fibre Channel Mass Storage Driver for HP-UX 11i v3 overview 3