FibrChanl-01 (fcd) B.11.31.1105 Fibre Channel Mass Storage Driver for HP-UX 11i v3 Release

Table 3 HP-UX September 2010 (AR1009) Fixes (continued)
DescriptionDefect ID
This fixes the issue where the fcmsutil utility returns the message Target port is in
invalid state, when the user specifies the N_Port_ID as a parameter.
QXCR1000815634
This fixes the issue where the fcd driver may panic with Bad News!, if the first open of the target
failed because the link is down.
QXCR1001030695
This fixes the issue where the health state of the fcd instances in ioscan may incorrectly show
that it's online, even though the link is down.
QXCR1001024841
This fixes the issue where FC-4 type devices that have disappeared from the Name Server are
not logged in syslog.
QXCR1000990675
This fixes the issue where FCP targets are intermittently not being seen during boot, especially
on a large SAN configuration.
QXCR1001008433
This fixes the fcmsutil's flash failure issue, due to the fcd driver misinterpreting a TAG field in
the Vital Product Data.
QXCR1001012664
SNIA does not provide speed for AH401A, so System Management Homepage (SMH) doesn't
display speed for AH401A.
QXCR1001038471
Table 4 HP-UX May 2010 (WEB1005) Fixes
DescriptionDefect ID
This fixes the issue where the fcmsutil fails to update the ROM firmware for the 4Gb or 8Gb
Qlogic card if the ROM firmware version is 5 or greater.
QXCR1001021139
Table 5 HP-UX March 2010 (WEB1003) Fixes
DescriptionDefect ID
This fixes an issue where the SNIA returns HBA_STATUS_ERROR for HBA_SendCTPassThru
API call failure.
QXCR1000887704
This fixes a Serviceguard “safety timer” panic on a single-cpu vpar configuration, when the
command fcmsutil_ns_query_port is executed.
QXCR1001007011
This fixes the issue in the fcd driver that can intermittently result in a mailbox timeout fatal error.QXCR1000994941
This fixes the significant drop in I/O performance encountered after installing FCD B.11.31.0903
and later versions.
QXCR1001000800
Table 6 HP-UX March 2010 (AR1003) Fixes
DescriptionDefect ID
There are no fixes for the AR1003 release.N/A
Table 7 HP-UX January 2010 (WEB1001) Fixes
DescriptionDefect ID
This fixes the issue where the fcd driver corrupts the card's NVRAM content, due to the current
driver logic, which computes and writes the checksum incorrectly under certain circumstances.
QXCR1000979379
The NVRAM corruption issue occurs only if the OS Boot Mode is set to [Windows/Linux/Other],
which is the default (i.e., manufacturing) setting.
The fcd driver may cause a system panic with a data TLB fault. This problem, due to a potential
race condition, where the fcd driver receives an I/O completion interrupt from the card, while it
is still processing fatal errors, has been fixed.
QXCR1000991234
This fixes an issue where the fcd driver may panic during boot, when there is an 8 Gb Mezzanine
HBA configured in a blade server.
QXCR1000934838
4