FibrChanl-01 (fcd) B.11.31.1203.01 Fibre Channel Mass Storage Driver for HP-UX 11i v3 Release Notes

Table 6 HP-UX September 2010 (AR1009) Fixes (continued)
DescriptionDefect ID
This fixes the fcmsutil's flash failure issue, due to the fcd driver misinterpreting a TAG field in
the Vital Product Data.
QXCR1001012664
SNIA does not provide speed for AH401A, so System Management Homepage (SMH) doesn't
display speed for AH401A.
QXCR1001038471
Table 7 HP-UX May 2010 (WEB1005) Fixes
DescriptionDefect ID
This fixes the issue where the fcmsutil fails to update the ROM firmware for the 4Gb or 8Gb
Qlogic card if the ROM firmware version is 5 or greater.
QXCR1001021139
Table 8 HP-UX March 2010 (WEB1003) Fixes
DescriptionDefect ID
This fixes an issue where the SNIA returns HBA_STATUS_ERROR for HBA_SendCTPassThru
API call failure.
QXCR1000887704
This fixes a Serviceguard “safety timer” panic on a single-cpu vpar configuration, when the
command fcmsutil_ns_query_port is executed.
QXCR1001007011
This fixes the issue in the fcd driver that can intermittently result in a mailbox timeout fatal error.QXCR1000994941
This fixes the significant drop in I/O performance encountered after installing FCD B.11.31.0903
and later versions.
QXCR1001000800
Table 9 HP-UX March 2010 (AR1003) Fixes
DescriptionDefect ID
There are no fixes for the AR1003 release.N/A
Table 10 HP-UX January 2010 (WEB1001) Fixes
DescriptionDefect ID
This fixes the issue where the fcd driver corrupts the card's NVRAM content, due to the current
driver logic, which computes and writes the checksum incorrectly under certain circumstances.
QXCR1000979379
The NVRAM corruption issue occurs only if the OS Boot Mode is set to [Windows/Linux/Other],
which is the default (i.e., manufacturing) setting.
The fcd driver may cause a system panic with a data TLB fault. This problem, due to a potential
race condition, where the fcd driver receives an I/O completion interrupt from the card, while it
is still processing fatal errors, has been fixed.
QXCR1000991234
This fixes an issue where the fcd driver may panic during boot, when there is an 8 Gb Mezzanine
HBA configured in a blade server.
QXCR1000934838
This fixes the issue where SNIA does not report more than 500 luns per HBA.QXCR1000922032
fcd panics during system dump to an EMC device. This issue, caused by sense data handling,
has been fixed.
QXCR1000976060
This fixes a system hang which occurred after CPU deletion. The hang was caused by interrupt
migration handling in the fcd driver.
QXCR1000966390
Known problems fixed in this version 5