FibrChanl-01 (fcd) B.11.31.1209 Fibre Channel Mass Storage Driver for HP-UX 11i v3 Release Notes

1. Establish a telnet session with the iLO MP.
2. Logon to the iLO MP using the Admin password.
3. Type CM to enter the Command Menu.
4. Type DF to enter the Display FRU Information Menu.
5. Type S to display a list of specific FRUs.
6. Type 05 for the I/O Assembly FRU.
◦ For AD295A #200, AD296A #200, and AD298A, the Product Name displays as:
10 Slot PCI-E IOBP
◦ For AD295A #300, AD296A #300, and AD230A, the Product Name displays as:
10 Slot PCI-E 1.1 IOBP
• If a system is low on available contiguous memory, an online addition can fail
The failure will be seen with messages similar to the following:
#sd10vp3 :/> olrad -A 8-0-1-5
Activity : Start of Post Add
Target slot : 8-0-1-5
Addition of the card in progress...
[ NOTE: Killing or otherwise aborting this olrad command may not cancel the Card Add operation. ]
H/W Path Class Description
=====================================================
5/0/6/0/0/0 slot PCI Slot
5/0/6/0/0/0/0 fc PCIe SerialBus (10772532)
Error : ioscan failed! card not claimed
Target slot : 8-0-1-5
Error : On line ADD failed !! Attention LED may be left in blinking state
Target slot : 8-0-1-5
-------------------------------------------------------
Additionally, syslog will contain messages similar to the following:
vmunix: FCD: Allocate shared memory failed, error code = -1
vmunix: init of hardware not successful. id=10772532 and my_isc=2
Corrective action: Retry the operation at a time when the system has more free memory
available.
• DLKM infrastructure must be installed
A complete Dyamically Loadable Kernel Module (DLKM) infrastructure is required for
FibrChanl-01 B.11.31.0803. This requires that the following kernel patches be installed:
◦ PHKL_36387: MCA recovery/shutdown patch
◦ PHKL_36332: Cumulative GIO patch
◦ PHCO_36371: PCI OL* DLKM and Chassis Delete
These patches and other required patches are delivered in the FEATURE11i patch bundle
on the HP-UX 11i v3 (B.11.31) OEUR media for September 2007. You may also check
availability of the patch at the HP IT Resource Center site: http://itrc.hp.com
• crashconf displays incorrect size for dump devices
FibrChanl-01 now supports dump devices that are greater than 2TB in size. However,
crashconf displays an incorrect size for dump devices that are greater than 4TB.
Corrective action: Install patch PHCO_36550 to fix this problem. This patch is delivered in
the HWEnable11i patch bundle on the HP-UX 11i v3 (B.11.31) OEUR media for December
2007. You may also check availability of the patch at the HP IT Resource Center site: http://
itrc.hpc.om
Known problems and limitations 9