FibrChanl-01 (fcd) B.11.31.1209.01 Fibre Channel Mass Storage Driver for HP-UX 11i v3 Release Notes
Table 4 HP-UX March 2012 (WEB1203) Fixes
DescriptionDefect ID
Driver has been modified to handle FW timeout issue seen when ERASE command is issued to
tape drives. Maximum IO timeout value in driver has been increased from 0x1999 seconds to
0xFFFF seconds to be in compliance with the change in Q-Logic ISP 24xx FW specification.
QXCR1001192329
Warning message is updated for FC Mezzanine configured in Loop Topology.QXCR1001196129
Table 5 HP-UX March 2012 (AR1203) Fixes
DescriptionDefect ID
The fcd driver is modified to display port and node symbolic names for FlexFC ports.QXCR1001063170
This fixes an issue in the fcd driver which prevented link statistics from being retrieved using the
fcmsutil stat command.
QXCR1001134924
This fixes the fcd driver to log an appropriate diagnostic message when a previously lost FC
target device comes back online.
QXCR1001092583
This fixes fcmsutil to print correct SFP information or print appropriate error message for the
fcmsutil sfp command.
QXCR1001140465
Issue WARNING messages if FC Mezzanine is configured in loop.QXCR1001159905
Driver has been modified to handle the intermittent ioscan hangs seen in a bladed configuration
with Q-Logic FC cards due to infinite PLOGI retries to the Fabric Name Server. The PLOGI retry
count to the Name Server has been modified in the driver to a definite value.
QXCR1001169766
Table 6 HP-UX September 2011 (AR1109) Fixes
DescriptionDefect ID
This fixes a memory leak in the fcd driver that occurs after concurrent execution of certain fcmsutil
disable and ns_query_ports commands.
QXCR1001131764
fcmsutil output has been modified to display target symbolic port and node names as "None"
when respective symbolic name values are not returned by the targets.
QXCR1001068587
Table 7 HP-UX May 2011 (WEB1105) Fixes
DescriptionDefect ID
This fixes an issue in Qlogic 8Gb FC Firmware that enables it to use correct slot-specific SerDes
settings for the 8Gb PCIe Dual Port Mezzanine Fibre Channel Adapter.
QXCR1001123656
Table 8 HP-UX March 2011 (AR1103) Fixes
DescriptionDefect ID
SNIA: FC Instance Enumeration FCPortControllerCollection fails if port disabled.QXCR1001020559
SNIA: FC Provider dumps core during CHO test.QXCR1001073517
This fixes the issue where the fcd driver does not restore the Symbolic Names to their default
values when requested through scsimgr.
QXCR1001051386
This fixes a memory leak in the fcd driver after executing certain fcmsutil echo, test, and rls
commands.
QXCR1001041080
This fixes a memory leak in the fcd driver after executing certain fcmsutil ns_query_ports commands.QXCR1001083355
This fixes the issue where the fcmsutil stat command is displaying the unneeded SBC hit counter
statistic for the 2Gb Fibre Channel Adapter.
QXCR1001060235
This fixes the issue where ioscan is displaying the wrong Part Number for the 4Gb Dual Port PCIe
Mezzanine Fibre Channel Adapter.
QXCR1001083067
4