FibrChanl-01 (fcd) B.11.31.1303 Fibre Channel Mass Storage Driver for HP-UX 11i v3 Release Notes

Table 9 HP-UX March 2011 (AR1103) Fixes
DescriptionDefect ID
SNIA: FC Instance Enumeration FCPortControllerCollection fails if port disabled.QXCR1001020559
SNIA: FC Provider dumps core during CHO test.QXCR1001073517
This fixes the issue where the fcd driver does not restore the Symbolic Names to their default
values when requested through scsimgr.
QXCR1001051386
This fixes a memory leak in the fcd driver after executing certain fcmsutil echo, test, and rls
commands.
QXCR1001041080
This fixes a memory leak in the fcd driver after executing certain fcmsutil ns_query_ports commands.QXCR1001083355
This fixes the issue where the fcmsutil stat command is displaying the unneeded SBC hit counter
statistic for the 2Gb Fibre Channel Adapter.
QXCR1001060235
This fixes the issue where ioscan is displaying the wrong Part Number for the 4Gb Dual Port PCIe
Mezzanine Fibre Channel Adapter.
QXCR1001083067
Table 10 HP-UX September 2010 (AR1009) Fixes
DescriptionDefect ID
This fixes the issue where rmsf can hang when trying to delete the stale device special file on
the FC port that is no longer available or waiting for a link-up. The rmsf hang can further cause
subsequent hang in other commands (e.g. ioscan, olrad, network access).
QXCR1000984392
This fixes the issue where the timer list in the driver is corrupted, resulting in a panic with
Spinlock held too long!!
QXCR1000924185
This fixes the issue where the fcmsutil utility returns the message Target port is in
invalid state, when the user specifies the N_Port_ID as a parameter.
QXCR1000815634
This fixes the issue where the fcd driver may panic with Bad News!, if the first open of the target
failed because the link is down.
QXCR1001030695
This fixes the issue where the health state of the fcd instances in ioscan may incorrectly show
that it's online, even though the link is down.
QXCR1001024841
This fixes the issue where FC-4 type devices that have disappeared from the Name Server are
not logged in syslog.
QXCR1000990675
This fixes the issue where FCP targets are intermittently not being seen during boot, especially
on a large SAN configuration.
QXCR1001008433
This fixes the fcmsutil's flash failure issue, due to the fcd driver misinterpreting a TAG field in
the Vital Product Data.
QXCR1001012664
SNIA does not provide speed for AH401A, so System Management Homepage (SMH) doesn't
display speed for AH401A.
QXCR1001038471
Table 11 HP-UX May 2010 (WEB1005) Fixes
DescriptionDefect ID
This fixes the issue where the fcmsutil fails to update the ROM firmware for the 4Gb or 8Gb
Qlogic card if the ROM firmware version is 5 or greater.
QXCR1001021139
Known problems fixed in this version 5