FibrChanl-02 (fclp) B.11.23.1106 Fibre Channel Mass Storage Driver for HP-UX 11i v2 Release Notes

Table 10 Recommended Firmware Versions (June 2011)

Firmware versionEFI driver versionFibre channel adapter

2.70X5 or later3.21A3 or laterAD355A

2.70X5 or later3.21A3 or laterAD299A

For current recommended firmware versions, see the HP Fibre Channel Host Bus Adapter Support

Matrix at http://www.hp.com/go/hpux-iocards-docs, by clicking onHP-UX 11i v2 I/O Cards .

If your Fibre Channel adapter is not listed in the preceding table, no updates are required to enable

boot support.

NOTE: Display EFI driver and ROM firmware versions using fcmsutil <fclp_device_file>

vpd

EFI/firmware bundles can be downloaded from www.hp.com, in the Software and Driver Downloads

section.

Hardware requirements

This version of the FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX 11i v2 runs

on HP Integrity servers with the HP-UX 11i v2 (11.23) operating system. It supports Fibre Channel

hardware products such as:

• AD355A PCIe Dual Port 4Gb Fibre Channel Adapter

• AD299A PCIe Single Port 4Gb Fibre Channel Adapter

Related information

The latest documentation for the FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX

11i v2 is available at http://www.hp.com/go/hpux-iocards-docs, by clicking onHP-UX 11i v2

I/O Cards . Available documents include:

• Support Guide: includes an adapter overview, installation details, adapter configuration,

troubleshooting and maintenance information, additional features, and regulatory information.

• Installation Guide: includes software and hardware installation information for specific HBAs.

• Support Matrix: includes a matrix of Fibre Channel adapters, supported hardware platforms,

operating systems, driver bundle versions, and minimum PDC/firmware requirements.

• White Paper: white papers can also be found in this section.

Software availability in native languages

This product is available only in the English language.