FibrChanl-02 (fclp) B.11.31.0906 Fibre Channel Mass Storage Driver Release Notes, Edition 3.0 (June 2009)

Table 5 Recommended Firmware/EFI Versions (June 2009) (continued)
Universal Boot CodeFirmware VersionEFI Driver VersionFibre Channel Adapter
6.03A71.10A5 or later6.03A7 or later456972-B21
N/A2.70X5 or later3.21A3 or laterAD355A, AD299A
N/A2.72A2 or later3.21A3 or laterAD221A, AD222A,
AD393A
6.00A52.72A2 or later4.00A1 or later403621-B21
For current recommended firmware versions, see the HP Fibre Channel Host Bus Adapter Support
Matrix at http://docs.hp.com/en/netcom.html#Fibre%20Channel
If your Fibre Channel adapter is not listed in the preceding table, no updates are required to
enable boot support.
NOTE: Display EFI driver and ROM firmware versions using fcmsutil
<fclp_device_file> vpd
EFI/firmware bundles can be downloaded from www.hp.com, in the Software and Driver Downloads
section.
Hardware Requirements
This version of the FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX 11i v3 runs
on HP Integrity servers with the HP-UX 11i v3 (11.31) operating system. It supports Fibre Channel
hardware products such as:
• AH403A PCIe Dual Port 8Gb Fibre Channel Adapter
• AH402A PCIe Single Port 8Gb Fibre Channel Adapter
• 456972-B21 Dual Port PCIe Emulex 8 Gb Mezzanine Fibre Channel Adapter
• AD355A PCIe Dual Port 4Gb Fibre Channel Adapter
• AD299A PCIe Single Port 4Gb Fibre Channel Adapter
• AD221A HP PCIe Single Port 4Gb Fibre Channel and Single Port 1000 BT Adapter
• AD222A HP PCIe Dual Port 4Gb Fibre Channel and Dual Port 1000BT Adapter
• AD393A HP PCIe Dual Port 4Gb Fibre Channel and Dual Port 1000SX Adapter
• 403621-B21 Emulex LPe1105–HP 4Gb Fibre Channel Adapter for HP c-Class BladeSystem
NOTE: Please note the following slot limitations on rx3600 and rx6600 servers:
• Slots 5 and 6 are the recommended slots for AD221A, AD222A, and AD393A adapters.
• Slots 3 and 4 are also supported for AD221A, AD222A, and AD393A adapters, but with the
following restrictions:
I/O performance of the card may be limited.
Online Replacement is not supported.
Emulex 4Gb Fibre Channel Mezzanine (403621-B21) on HP Integrity Blade Servers
The Emulex LPe1105-HP 4Gb Fibre Channel Mezzanine Card for HP c-Class BladeSystem (Product
Number 403621-B21) has been shipping on HP Proliant c-Class blades for some time. The cards
have been modified to be compatible with HP Integrity c-Class blades, yet they maintain their
compatibility with Proliant c-Class blades.
The new card versions are sold using the same product number as the previous versions; that
is, 403621-B21, but with a new Engineering Date Code to identify the new cards as being
compatible with HP Integrity BladeSystems.
Compatibility and Installation Requirements 9