FibrChanl-02 (fclp) B.11.31.1003.02 Fibre Channel Mass Storage Driver Release Notes, Edition 2.0 (March 2010)

Card revision
Although EDC is the primary way to identify changes in recipe for Integrity systems, it is also
possible to use the card “Rev”, which is printed on a label on the box containing the card, and
on a label on the card.
CAUTION: There are at least three different “Rev” identifiers on the card. The correct one to
use is printed on the SKU label — Integrity-supported versions have a “REV” of 0C or later.
Firmware and EFI
HP Integrity blades require the following minimum firmware and EFI:
• Firmware: 2.72a2
• EFI: 4.00a1 (contained in Universal Boot Code 6.00a5)
Look for EFI version ZU6.00A5 or later in the fcmsutil output.
Related information
The latest documentation for the FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for
HP-UX 11i v3 is available at http://www.docs.hp.com, under the I/O Cards and Networking Software
section in the Fibre Channel category. Available documents include:
• Support Guide: includes an adapter overview, installation details, adapter configuration,
troubleshooting and maintenance information, additional features, and regulatory
information.
• Installation Guide: includes software and hardware installation information for specific
HBAs.
12