FibrChanl-02 (fclp) B.11.31.1003.02 Fibre Channel Mass Storage Driver Release Notes, Edition 2.0 (March 2010)

This document provides information about the B.11.31.1003.02 release of the FibrChanl-02 (fclp)
Fibre Channel Mass Storage Driver for HP-UX 11i v3.
FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX 11i v3
overview
This release of the FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX 11i v3
(version B.11.31.1003.02) documents defect fixes and version changes.
New and changed features in this release
New features
The following feature is new with the B.11.31.1003.01 version of the FibrChanl-02 (fclp) Fibre
Channel Mass Storage Driver for HP-UX 11i v3:
• There are no new features for this release.
Known problems fixed in this version
The following issues have been fixed in the FibrChanl-02 (fclp) Fibre Channel Mass Storage
Driver for HP-UX 11i v3 March 2010 (WEB1003 and AR1003) releases. To view the entire details
of the fix, refer to the HP IT Resource Center at: http://forums1.itrc.hp.com/service/forums/
home.do
Table 1 HP-UX March 2010 (WEB1003) Fixes
DescriptionDefect ID
Corrected a timing-related fclp driver issue that caused an inconsistent driver state. When the
driver detected this inconsistent state, it would reset the HBA unexpectedly.
QXCR1000972188
QXCR1000947409
QXCR1000980397
Modified the fclp uninitialization sequence to correct hangs that would occur during driver
unload. These hangs would only occur if I/O was in progress when the unload was initiated.
QXCR1000978071
QXCR1000946402
QXCR1000978980
QXCR1000951060
Corrected multiple issues in the fclp unload sequence that could result in unpredictable driver
unload behavior.
QXCR1000991710
Table 2 HP-UX March 2010 (AR1003) Fixes
DescriptionDefect ID
This fixes the issue where snia_demo ouputs an error message: /dev/fclp* not found,
when run on a system with the fclp driver installed and no fclp adapters connected.
QXCR1000931979
This fixes the issue where SNIA: HBA_OpenAdapter API fails with the HBA_STATUS_ERROR.QXCR1000969594
This fixes the issue where SNIA does not report more than 500 luns per HBA.QXCR1000976833
Table 3 HP-UX November 2009 Fixes
DescriptionDefect ID
Some disk storage arrays, like the XP10000, might remain offline after the storage array was
reset. This problem, which only occurred in an arbitrated loop configuration, has been fixed.
QXCR1000958881
FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX 11i v3 overview 5