FibrChanl-02 (fclp) B.11.31.1103 Fibre Channel Mass Storage Driver for HP-UX 11i v3 Release Notes

This document provides information about the B.11.31.1103 release of the FibrChanl-02 (fclp)
Fibre Channel Mass Storage Driver for HP-UX 11i v3.
FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX 11i v3
overview
This release of the document for the FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for
HP-UX 11i v3 (version B.11.31.1103) documents defect fixes and version changes.
New and changed features in this release
New features
The following feature is new with the B.11.31.1103 version of the FibrChanl-02 (fclp) Fibre Channel
Mass Storage Driver for HP-UX 11i v3:
• There are no new features for this release.
Known problems fixed in this version
The following issues have been fixed in the FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver
for HP-UX 11i v3 March 2011 (AR1103) releases. To view the entire details of the fix, refer to the
HP IT Resource Center at: http://forums1.itrc.hp.com/service/forums/home.do
Table 1 HP-UX March 2011 (AR1103) Fixes
DescriptionDefect ID
SNIA: Model for AH402A/AH403A is displayed as AD222A in SMH.QXCR1001065388
SNIA: SMH displays 4G speed for 8G Emulex HBAs (AH402A/AH403A).QXCR1001065578
SNIA: FC Instance Enumeration FCPortControllerCollection fails if port disabled.QXCR1001020559
Corrected an fcmsutil/fclputil display issue which would intermittently display an incorrect node
port state for a target port that had been moved to a new switch port.
QXCR1000892434
Corrected driver error that caused SNIA to incorrectly report the current and maximum port speed
for 8Gb HBAs.
QXCR1001054494
This corrects a problem that occurs when the fclp.pl script attempts to print some improperly
formatted trace data.
QXCR1001052221
This fixes a panic that occurs when an fcmsutil option is run at the same time that the fclp driver
is being unloaded.
QXCR1001083400
Table 2 HP-UX September 2010 (AR1009) Fixes
DescriptionDefect ID
Under rare conditions,the ioscan process can cause stack overflow panic, when there are
several targets reported offline. This problem has been corrected.
QXCR1001017932
Write operation to tape devices that encountered CRC errors can take several minutes to recover.
This problem has been corrected.
QXCR1000977659
Fixed panic due to bad kern memory access in fclp module unload with OLD events on the fclp
card.
QXCR1001019501
Renamed man page for ifc_disable_mgmt_lun to be fclp_ifc_disable_mgmt_lun.QXCR1000996401
FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX 11i v3 overview 3