FibrChanl-02 (fclp) B.11.31.1109 Fibre Channel Mass Storage Driver for HP-UX 11i Release Notes

Requirements for boot support: AH402A, AH403A, 456972-B21, AD355A, AD299A, AD221A,
AD222A, AD393A, 403621-B21
To boot through the fibre channel ports on these adapters, HP recommends that you update the
EFI driver and onboard firmware to the latest version. This table lists the recommended EFI and
firmware versions at the release of FibrChanl-02 (fclp) driver, version B.11.31.1109:
Table 13 Recommended firmware/EFI versions (September 2011)
Universal Boot CodeFirmware VersionEFI Driver VersionFibre Channel Adapter
5.03a102.00a4 or later4.00a8 or laterAH403A
5.03a102.00a4 or later4.00a8 or laterAH402A
6.03a112.00a4 or later4.00a8 or later456972-B21
5.03a102.82x4 or later4.00a8 or laterAD355A, AD299A
5.03a102.82x4 or later4.00a8 or laterAD221A, AD222A,
AD393A
6.03a112.82x4 or later4.00a8 or later403621-B21
For current recommended firmware versions, see the HP Fibre Channel Host Bus Adapter (fcd and
fclp) Support Matrix at http://www.hp.com/go/hpux-iocards-docs, by clicking onHP Fibre Channel
Host Bus Adapters.
If your Fibre Channel adapter is not listed in the preceding table, no updates are required to enable
boot support.
NOTE: Display EFI driver and ROM firmware versions using fcmsutil <fclp_device_file>
vpd
EFI/firmware bundles can be downloaded from www.hp.com, in the Software and Driver Downloads
section.
Hardware Requirements
This version of the FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX 11i v3 runs
on HP Integrity servers with the HP-UX 11i v3 (11.31) operating system. It supports Fibre Channel
hardware products such as:
• AH403A PCIe Dual Port 8Gb Fibre Channel Adapter
• AH402A PCIe Single Port 8Gb Fibre Channel Adapter
• 456972-B21 Dual Port PCIe Emulex 8 Gb Mezzanine Fibre Channel Adapter
• AD355A PCIe Dual Port 4Gb Fibre Channel Adapter
• AD299A PCIe Single Port 4Gb Fibre Channel Adapter
• AD221A HP PCIe Single Port 4Gb Fibre Channel and Single Port 1000 BT Adapter
• AD222A HP PCIe Dual Port 4Gb Fibre Channel and Dual Port 1000BT Adapter
• AD393A HP PCIe Dual Port 4Gb Fibre Channel and Dual Port 1000SX Adapter
• 403621-B21 Emulex LPe1105–HP 4Gb Fibre Channel Adapter for HP c-Class BladeSystem
Compatibility and installation requirements 9