FibrChanl-02 (fclp) B.11.31.1109.01 Fibre Channel Mass Storage Driver for HP-UX 11i v3 Release Notes

This document provides information about the B.11.31.1109.01 release of the FibrChanl-02 (fclp)
Fibre Channel Mass Storage Driver for HP-UX 11i v3.
FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX 11i v3
overview
This release of the document for the FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for
HP-UX 11i v3 (version B.11.31.1109.01) documents defect fixes and version changes.
New and changed features in this release
New features
This feature is new with the B.11.31.1109.01 version of the FibrChanl-02 (fclp) Fibre Channel
Mass Storage Driver for HP-UX 11i v3:
• This release adds support for the AT094A HBA.
Known problems fixed in this version
These issues have been fixed in the FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for
HP-UX 11i v3 August 2011 (WEB1108) release. To view the entire details of the fix, refer to the
HP IT Resource Center at: http://forums1.itrc.hp.com/service/forums/home.do
Table 1 HP-UX August 2011 (WEB1108) Fixes
WEB1108 release supersedes the AR1109 release.
DescriptionDefect ID
This fixes an issue where disks show up as NO_HW in the ioscan output if an unsolicited and
unsupported ELS request comes in from a known target.
QXCR1001145460
This fixes a failure case in dma mapping.QXCR1001141638
Added Fibre Channel support for the AT094A HBA.QXCR1001113883
Table 2 HP-UX September 2011 (AR1109) Fixes
DescriptionDefect ID
This fixes a hang that may occur during olrad delete.QXCR1001094158
If a zoning change or other fabric perturbation causes an fclp HBA port to permanently lose
name server visibility to all ports in the fabric while still maintaining a successful fabric login, this
change will ensure that commands to the targets through alternate paths will not be delayed.
QXCR1001067015
This corrects a potential null pointer reference and subsequent system panic during driver
initialization.
QXCR1001097754
This change will log an Event Monitoring Service (EMS) event and syslog information whenever
a Fibre device comes back in the Name Server.
QXCR1001094073
This fixes the issue where the fclp driver may panic with “Bad News!” when an fcmsutil command
is run at the same time that the fclp driver is being reset.
QXCR1001123527
This fixes the issue where the fclp driver may panic with “Not all objects de-allocated" during
FibrChanl-02 depot installation or during DLKM unload operation.
QXCR1001124463
This fixes the issue where the fclp driver may panic with “Bad News!” during DLKM unload
operation.
QXCR1001127533
This fixes the issue where ioscan may not show the fclp driver’s device special files (DSFs) when
a reboot is followed after FibrChanl-02 depot installation.
QXCR1001021546
FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX 11i v3 overview 3