FibrChanl-02 (fclp) B.11.31.1311 Fibre Channel Mass Storage Driver for HP-UX 11i v3 Release Notes

Table 5 HP-UX March 2012 (AR1203) Fixes (continued)
DescriptionDefect ID
Issue WARNING messages if FC Mezzanine is configured in loop.QXCR1001170935
This fixes the issue where the fclp driver may panic with “Not all objects de-allocated” when the
ESCSI controller unregistration failed because tgt paths under that controller are still registered
with SCSI.
QXCR1001156003
Table 6 HP-UX August 2011 (WEB1108) Fixes
WEB1108 release supersedes the AR1109 release.
DescriptionDefect ID
This fixes an issue where disks show up as NO_HW in the ioscan output if an unsolicited and
unsupported ELS request comes in from a known target.
QXCR1001145460
This fixes a failure case in dma mapping.QXCR1001141638
Added Fibre Channel support for the AT094A HBA.QXCR1001113883
Table 7 HP-UX September 2011 (AR1109) Fixes
DescriptionDefect ID
This fixes a hang that may occur during olrad delete.QXCR1001094158
If a zoning change or other fabric perturbation causes an fclp HBA port to permanently lose
name server visibility to all ports in the fabric while still maintaining a successful fabric login, this
change will ensure that commands to the targets through alternate paths will not be delayed.
QXCR1001067015
This corrects a potential null pointer reference and subsequent system panic during driver
initialization.
QXCR1001097754
This change will log an Event Monitoring Service (EMS) event and syslog information whenever
a Fibre device comes back in the Name Server.
QXCR1001094073
This fixes the issue where the fclp driver may panic with “Bad News!” when an fcmsutil command
is run at the same time that the fclp driver is being reset.
QXCR1001123527
This fixes the issue where the fclp driver may panic with “Not all objects de-allocated" during
FibrChanl-02 depot installation or during DLKM unload operation.
QXCR1001124463
This fixes the issue where the fclp driver may panic with “Bad News!” during DLKM unload
operation.
QXCR1001127533
This fixes the issue where ioscan may not show the fclp driver’s device special files (DSFs) when
a reboot is followed after FibrChanl-02 depot installation.
QXCR1001021546
Table 8 HP-UX April 2011 (WEB1104) Fixes
DescriptionDefect ID
SNIA library has been modified to not to use invalid target entries that caused core dumps.QXCR1001118460
Table 9 HP-UX March 2011 (AR1103) Fixes
DescriptionDefect ID
SNIA: Model for AH402A/AH403A is displayed as AD222A in SMH.QXCR1001065388
SNIA: SMH displays 4G speed for 8G Emulex HBAs (AH402A/AH403A).QXCR1001065578
SNIA: FC Instance Enumeration FCPortControllerCollection fails if port disabled.QXCR1001020559
Corrected an fcmsutil/fclputil display issue which would intermittently display an incorrect node
port state for a target port that had been moved to a new switch port.
QXCR1000892434
Known problems fixed in this version 5