FibrChanl-02 (fclp) B.11.31.1403 Fibre Channel Mass Storage Driver for HP-UX 11i v3 Release Notes

• 403621-B21 Emulex LPe1105–HP 4Gb Fibre Channel Adapter for HP c-Class BladeSystem
• AT094A PCIe Fibre Channel 2-port 8Gb FC/2-port 1/10GBE Combo Adapter
NOTE: Please note these slot limitations on rx3600 and rx6600 servers:
• Slots 5 and 6 are the recommended slots for AD221A, AD222A, and AD393A adapters.
• Slots 3 and 4 are also supported for AD221A, AD222A, and AD393A adapters, but with
these restrictions:
I/O performance of the card may be limited.
Online Replacement is not supported.
Emulex 4Gb Fibre Channel Mezzanine (403621-B21) on HP Integrity blade servers
The Emulex LPe1105-HP 4Gb Fibre Channel Mezzanine Card for HP c-Class BladeSystem (Product
Number 403621-B21) has been shipping on HP Proliant c-Class blades for some time. The cards
have been modified to be compatible with HP Integrity c-Class blades, yet they maintain their
compatibility with Proliant c-Class blades.
The new card versions are sold using the same product number as the previous versions; that is,
403621-B21, but with a new Engineering Date Code to identify the new cards as being compatible
with HP Integrity BladeSystems.
It is not possible to update previous recipes/versions of the Mezzanine card to be compatible with
the HP Integrity blades.
Identification
These are the ways to identify the versions of the cards that are compatible with Integrity c-Class
blades.
EDC change
Newer cards are built with an Engineering Date Code that marks the changes required for Integrity
— Integrity-supported versions have an EDC of B-4813 or later.
The EDC code is printed on a label on the box containing the card, on a label on the card, and
is included in the Vital Products Data (VPD) that is flashed into the card during the manufacture of
the part. This means that you will be able to identify a version of the card supported on Integrity
both visually and electronically.
Compatibility and installation requirements 13