FibrChanl-02 (fclp) B.11.31.1403 Fibre Channel Mass Storage Driver for HP-UX 11i v3 Release Notes

Card revision
Although EDC is the primary way to identify changes in recipe for Integrity systems, it is also
possible to use the card “Rev”, which is printed on a label on the box containing the card, and
on a label on the card.
CAUTION: There are at least three different “Rev” identifiers on the card. The correct one to use
is printed on the SKU label — Integrity-supported versions have a “REV” of 0C or later.
Firmware and EFI
HP Integrity blades require this minimum firmware and EFI:
• Firmware: 2.72a2
• EFI: 4.00a1 (contained in Universal Boot Code 6.00a5)
Look for EFI version ZU6.00A5 or later in the fcmsutil output.
Related information
The latest documentation for the FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX
11i v3 is available at http://www.hp.com/go/hpux-iocards-docs, by clicking onHP Fibre Channel
Host Bus Adapters. Available documents include:
• Support Guide: includes an adapter overview, installation details, adapter configuration,
troubleshooting and maintenance information, additional features, and regulatory information.
• Installation Guide: includes software and hardware installation information for specific HBAs.
Related information 15