FibrChanl-02 (fclp) B.11.31.1403 Fibre Channel Mass Storage Driver for HP-UX 11i v3 Release Notes

Table 8 HP-UX September 2011 (AR1109) Fixes (continued)

DescriptionDefect ID

This fixes the issue where the fclp driver may panic with “Bad News!” during DLKM unload

operation.

QXCR1001127533

This fixes the issue where ioscan may not show the fclp driver’s device special files (DSFs) when

a reboot is followed after FibrChanl-02 depot installation.

QXCR1001021546

Table 9 HP-UX April 2011 (WEB1104) Fixes

DescriptionDefect ID

SNIA library has been modified to not to use invalid target entries that caused core dumps.QXCR1001118460

Table 10 HP-UX March 2011 (AR1103) Fixes

DescriptionDefect ID

SNIA: Model for AH402A/AH403A is displayed as AD222A in SMH.QXCR1001065388

SNIA: SMH displays 4G speed for 8G Emulex HBAs (AH402A/AH403A).QXCR1001065578

SNIA: FC Instance Enumeration FCPortControllerCollection fails if port disabled.QXCR1001020559

Corrected an fcmsutil/fclputil display issue which would intermittently display an incorrect node

port state for a target port that had been moved to a new switch port.

QXCR1000892434

Corrected driver error that caused SNIA to incorrectly report the current and maximum port speed

for 8Gb HBAs.

QXCR1001054494

This corrects a problem that occurs when the fclp.pl script attempts to print some improperly

formatted trace data.

QXCR1001052221

This fixes a panic that occurs when an fcmsutil option is run at the same time that the fclp driver

is being unloaded.

QXCR1001083400

Table 11 HP-UX September 2010 (AR1009) Fixes

DescriptionDefect ID

Under rare conditions, the ioscan process can cause stack overflow panic, when there are

several targets reported offline. This problem has been corrected.

QXCR1001017932

Write operation to tape devices that encountered CRC errors can take several minutes to recover.

This problem has been corrected.

QXCR1000977659

Fixed panic due to bad kern memory access in fclp module unload with OLD events on the fclp

card.

QXCR1001019501

Renamed man page for ifc_disable_mgmt_lun to be fclp_ifc_disable_mgmt_lun.QXCR1000996401

Certain new tape drivers and virtual tape libraries can generate previously unseen FC traffic that

fclp does not handle properly, resulting in a panic with a data TLB fault. This problem has been

corrected.

QXCR1001004749

SNIA dumps core with command vxesd with fclp cards and driver.QXCR1001011407