FibrChanl-03 (fcoc) B.11.31.1204 Fibre Channel Mass Storage Driver for HP-UX 11i v3 Release Notes

• rx2800 i2 System Firmware s26.21 or higher

• C7000 OA Firmware 3.20 or higher

• VCSU FW 1.6.0 or higher

• VC-Enet FW Version 3.15 or higher (for profile migration, 3.17 or higher is required)

• NC551m Firmware version 2.104.356.3 or higher

• NC553m Firmware version 3.104.356.3 or higher

• CN1100E Firmware version 3.104.356.3 or higher

• HP-UX 11i v3 OS Fusion version B.11.31.1103 or higher

• HP-UX CommonIO 11.31.1103 (B.11.31.1109) or higher

For current recommended firmware versions, see the HP-UX Fibre Channel (fcd, fclp) and FlexFabric

FCoE (fcoc) Host Bus Adapter Support Matrix at http://www.hp.com/go/hpux-iocards-docs, by

clicking onHP Fibre Channel Host Bus Adapters.

NOTE: The FC-COMMON.FC-SNIA fileset is part of the CommonIO bundle. If

FC-COMMON.FC-SNIA (1103 or later) is not present on a system, swinstall of the FC-FCOC

product will display errors. If you ignore the errors and proceed with the swinstall, the

FC-FCOC.FC-FCOC-RUN fileset will not be installed.

After installation, the HBA firmware version as viewed from HP-UX will differ slightly from the

firmware versions specified above. When viewed from HP-UX, the firmware version is defined as

shown below:

For FW version x.y04.356.3:

x is:

BE2 chip (NC551m)2

BE3 chip (NC553m, CN1100E)3

y is:

NIC/iSCSI mode (not currently supported)1

NIC/FCoE mode7

Driver versions

The following table lists all the driver versions of the fcoc driver on HP-UX 11i v3 with their associated

release names and dates.

Table 8 Table of Driver Versions

Release DateDriver VersionRelease Name

November 2010B.11.31.1011Web Release 1011

March 2011B.11.31.1103Application Release 1103

March 2011B.11.31.1103.01Web Release 1103

September 2011B.11.31.1109.01Application Release 1109

August 2011B.11.31.1109.02Web Release 1108 (supersedes

AR1109)