FibrChanl-03 (fcoc) B.11.31.1303 Fibre Channel Mass Storage Driver for HP-UX 11i v3 Release Notes
Table Of Contents
- FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for HP-UX 11i v3 Release Notes
- Contents
- FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for HP-UX 11i v3 overview
- New and changed features in this release
- Known problems fixed in this version
- Known problems and limitations
- Compatibility and installation requirements
- Related information
- Software availability in native languages

This document provides information about the B.11.31.1303 release of the FibrChanl-03 (fcoc)
Fibre Channel Mass Storage Driver for HP-UX 11i v3.
FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for HP-UX 11i v3
overview
This release of the document for the FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for
HP-UX 11i v3 (version B.11.31.1303) documents defect fixes and version changes.
New and changed features in this release
New features
The following feature is new with the B.11.31.1303 version of the FibrChanl-03 (FCOC) Fibre
Channel Mass Storage Driver for HP-UX 11i v3:
• Tape functionality is supported with 613431-B21 and AT111-60001 with minimum adapter
firmware version v4.2.401.14
Known problems fixed in this version
These issues have been fixed in the FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for
HP-UX 11i v3 March 2013 (AR1303) release.
Table 1 HP-UX March 2013 (AR1303) Fixes
DescriptionDefect ID
This fixes a boot failure where server fails to boot with “-tm” option from a SAN device managed
by FCOC driver.
QXCR1001229792
This fixes a FCOC dump failure where compressed or concurrent dump may fail when three or
more devices are configured for OS crash dump.
QXCR1001233852
This fixes an issue where system may panic during port reset or cable pull sequence.QXCR1001208636
This corrects an issue where system may panic due to race condition in handling of multiple ELS
requests.
QXCR1001247588
This fixes an issue where the FCOC driver may hang during repeated dynamic load and unload
(DLKM) sequence.
QXCR1001174374
This corrects an issue where HBA port may fail to come online after VC FlexFabric resets.QXCR1001207506
Table 2 HP-UX September 2012 (AR1209) Fixes
DescriptionDefect ID
Installing or updating the FCOC driver no longer requires a reboot if the driver is not in use.QXCR1001179851
This fixes a memory leak in the FCOC driver that occurs when a dynamic module unload is
executed.
QXCR1001217140
This fixes the issue where the FCOC driver hangs during dynamic loading (DLKM) when the
system is low in memory.
QXCR1001205908
This fixes a timing-related issue in the FCOC driver when an fcmsutil option is run while the driver
is being reset that may result in the driver hanging during unload.
QXCR1001209093
This fixes a timing-related issue in the FCOC driver that may cause a system panic if ELS requests
are in progress, especially when the driver is being reset or cable is being disconnected.
QXCR1001205379
QXCR1001215209
QXCR1001208629
FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for HP-UX 11i v3 overview 3