FibrChanl-03 (fcoc) B.11.31.1303 Fibre Channel Mass Storage Driver for HP-UX 11i v3 Release Notes
Table Of Contents
- FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for HP-UX 11i v3 Release Notes
- Contents
- FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for HP-UX 11i v3 overview
- New and changed features in this release
- Known problems fixed in this version
- Known problems and limitations
- Compatibility and installation requirements
- Related information
- Software availability in native languages
• rx2800 i2 System Firmware s26.21 or higher
• C7000 OA Firmware 3.20 or higher
• VCSU FW 1.6.0 or higher
• VC-Enet FW Version 3.15 or higher (for profile migration, 3.17 or higher is required)
• NC551m Firmware version 2.104.356.3 or higher
• NC553m Firmware version 3.104.356.3 or higher
• CN1100E Firmware version 3.104.356.3 or higher
• HP-UX 11i v3 OS Fusion version B.11.31.1103 or higher
• HP-UX CommonIO 11.31.1103 or higher
For current recommended firmware versions, see the HP-UX Fibre Channel (fcd, fclp) and FlexFabric
FCoE (fcoc) Host Bus Adapter Support Matrix at http://www.hp.com/go/hpux-iocards-docs, by
clicking onHP Fibre Channel Host Bus Adapters.
NOTE: The FC-COMMON.FC-SNIA fileset is part of the CommonIO bundle. If
FC-COMMON.FC-SNIA (1103 or later) is not present on a system, swinstall of the FC-FCOC
product will display errors. If you ignore the errors and proceed with the swinstall, the
FC-FCOC.FC-FCOC-RUN fileset will not be installed.
Driver versions
The following table lists all the driver versions of the fcoc driver on HP-UX 11i v3 with their associated
release names and dates.
Table 9 Table of Driver Versions
Release DateDriver VersionRelease Name
November 2010B.11.31.1011Web Release 1011
March 2011B.11.31.1103Application Release 1103
March 2011B.11.31.1103.01Web Release 1103
September 2011B.11.31.1109.01Application Release 1109
August 2011B.11.31.1109.02Web Release 1108 (supersedes
AR1109)
March 2012B.11.31.1203Application Release 1203
September 2012B.11.31.1209Application Release 1209
March 2013B.1.31.13.03Application Release 1303
Hardware Requirements
This version of the FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for HP-UX 11i v3 runs
on HP Integrity BL8x0c i2, rx2800 i2, and Superdome2 servers with the HP-UX 11i v3 (B.11.31)
operating system. It supports Fibre Channel hardware products such as:
• 580151-B21 HP NC551m Dual Port 10Gb FlexFabric Converged Network Adapter
• 613433-001 HP NC553m Dual Port 10Gb FlexFabric Converged Network Adapter
• AT111-60001 HP Integrity CN1100E PCIe 2-Port Converged Network Adapter
Compatibility and installation requirements 9