FibrChanl-03 (fcoc) B.11.31.1403 Fibre Channel Mass Storage Driver for HP-UX 11i v3 Release Notes

This document provides information about the B.11.31.1403 release of the FibrChanl-03 (fcoc)
Fibre Channel Mass Storage Driver for HP-UX 11i v3.
FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for HP-UX 11i v3
overview
This release of the document for the FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for
HP-UX 11i v3 (version B.11.31.1403) documents defect fixes and version changes.
New and changed features in this release
New features
HP-UX 11i v3 March 2014 (AR1403) release
There are no new features in this release.
HP-UX 11i v3 November 2013 (WEB1311) release
The following feature is new with the B.11.31.1311 version of the FibrChanl-03 (fcoc) FibreChannel
Mass Storage Driver for HP-UX 11i v3:
• The FCOC driver bundle delivers a new set of the SNIA library required by Veritas Volume
Manager (VXVM) product versions 5.0.1 and 5.1SP1 or later.
Refer to the FibrChanl-03 (fcoc) B.11.31.1311 release note document for more detail.
HP-UX 11i v3 October 2013 (WEB1310) release
The following feature is new with the B.11.31.1310 version of the FibrChanl-03 (fcoc) Fibre
Channel Mass Storage Driver for HP-UX 11i v3:
• The FCOC driver supports multi-initiator NPIV with only Integrity VM.
Refer to the FibrChanl-03 (fcoc) B.11.31.1310 release note document for more detail.
HP-UX 11i v3 March 2013 (AR1303) release
The following feature is new with the B.11.31.1303 version of the FibrChanl-03 (fcoc) Fibre
Channel Mass Storage Driver for HP-UX 11i v3:
• Tape functionality is supported with 613431-B21 and AT111-60001 with minimum adapter
firmware version v4.2.401.14.
Refer to the FibrChanl-03 (fcoc) B.11.31.1303 release note document for more detail.
Changed features
There are no changed features in this release.
Known problems fixed in this version
These issues have been fixed in the FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for
HP-UX 11i v3 March 2014 2013 (AR1403) release.
Table 1 HP-UX March 2014 (AR1403) Fixes
DescriptionDefect ID
This fixes an issue in the FCOC driver where Tape IO is failing on AT111 when the host cable
connected to the Tape device is unplugged and plugged in again within 2 seconds.
QXCR1001260985
FibrChanl-03 (fcoc) Fibre Channel Mass Storage Driver for HP-UX 11i v3 overview 3