FibrChanl-03 (fcoc) B.11.31.1403 Fibre Channel Mass Storage Driver for HP-UX 11i v3 Release Notes

Table 2 HP-UX October 2013 (AR1310) Fixes
DescriptionDefect ID
This fixes the issue where system hang is seen because of a memory leak on SD2 systems during
continuous driver load and unload in a loop.
QXCR1001270184
This fixes the issue where the description for the LOM on BL8xxc i4 servers as part of the ioscan
output has an “N/A” string in the middle.
QXCR1001295252
This fixes the issue where devices configured under AVIO Stor HBA for an HP-UX 11i v3 guest
cannot be deleted if the guest is online.
QXCR1001275632
Table 3 HP-UX March 2013 (AR1303) Fixes
DescriptionDefect ID
This fixes a boot failure where server fails to boot with “-tm” option from a SAN device managed
by FCOC driver.
QXCR1001229792
This fixes a FCOC dump failure where compressed or concurrent dump may fail when three or
more devices are configured for OS crash dump.
QXCR1001233852
This fixes an issue where system may panic during port reset or cable pull sequence.QXCR1001208636
This corrects an issue where system may panic due to race condition in handling of multiple ELS
requests.
QXCR1001247588
This fixes an issue where the FCOC driver may hang during repeated dynamic load and unload
(DLKM) sequence.
QXCR1001174374
This corrects an issue where HBA port may fail to come online after VC FlexFabric resets.QXCR1001207506
Table 4 HP-UX September 2012 (AR1209) Fixes
DescriptionDefect ID
Installing or updating the FCOC driver no longer requires a reboot if the driver is not in use.QXCR1001179851
This fixes a memory leak in the FCOC driver that occurs when a dynamic module unload is
executed.
QXCR1001217140
This fixes the issue where the FCOC driver hangs during dynamic loading (DLKM) when the
system is low in memory.
QXCR1001205908
This fixes a timing-related issue in the FCOC driver when an fcmsutil option is run while the driver
is being reset that may result in the driver hanging during unload.
QXCR1001209093
This fixes a timing-related issue in the FCOC driver that may cause a system panic if ELS requests
are in progress, especially when the driver is being reset or cable is being disconnected.
QXCR1001205379
QXCR1001215209
QXCR1001208629
Table 5 HP-UX March 2012 (AR1203) Fixes
DescriptionDefect ID
This fixes a timing-related hang issue in the FCOC driver that may occur when the driver is being
unloaded.
QXCR1001144340
This fixes fcocutil to print correct SFP information or print appropriate error message.QXCR1001146915
This corrects a resource issue that may result in the FCOC driver never coming online after
repeated disables, enables, and resets, and subsequently being stuck in
"AUTHENTICATION/DISCOVERY" state as reported by fcmsutil
QXCR1001126158
This corrects a resource issue that may result in a system panic during FCOC driver unload.QXCR1001103767
This corrects an issue that may result in a system panic during FCOC driver unload.QXCR1001158686
This fixes a FCOC dump failure when crossing every 4GB page boundary.QXCR1001159017
4