HP A6684A and A6685A HSC Fibre Channel Adapter Release Notes, December 2001

HP A6684A and A6685A HSC Fibre Channel Adapter Release Notes
Compatibility Information and Installation Requirements
13
Compatibility Information and Installation Requirements
The following are software and hardware requirements for the A6684A and A6685A adapters.
For general installation procedures on installing the adapters, please refer to the
Hewlett-Packard Fibre Channel Mass Storage Adapters Manual, P/N A3636-90002, E1201.
For instructions on installing the adapter on your specific system, please refer to your
system’s documentation.
Software Requirements
For HP-UX 11.00:
• Software Driver version (B.11.00.10)
The driver is available from the AR1201 Application CD, or you can download it from the
web at http://www.software.hp.com.
• HP-UX 11.00 Operating System (32 or 64-bit)
• FCMS Patch PHKL_ 23939 or later (for 11.00 only)
This patch is required. You must install this patch before you install the driver. You can
download the patch from the ITRC at http://itrc.hp.com.
For HP-UX 11i:
• Software Driver version (B.11.11.09)
The 11i driver is pre-installed with the HP-UX 11i Operating Environments. You can also
get the driver from the AR1201 Application CD, or you can download it from the web at
http://www.software.hp.com.
• HP-UX 11i Operating System (32/64 bit)
• FCMS Patch PHKL_23626 or later (for 11i only)
This patch is required. You must install this patch before you install the driver. You can
download the patch from the ITRC at http://itrc.hp.com.
For HP-UX 10.20
• Software Driver version (B.10.20.03)
• HP-UX 10.20 Operating System
• J3630BA Fibre Channel Software Bundle (if not already installed)